|
|
Número de pieza | LSC480HJ01 | |
Descripción | TFT LCD | |
Fabricantes | Samsung | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de LSC480HJ01 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! Product Specification
( ) Preliminary Specification
( ¦ ) Approval Specification
Any modification of Spec is not allowed without SDC·s permission.
CUSTOMER
DATE OF ISSUE
Quatius
2013/10/23
MODEL NO.
EXTENSION CODE
LSC480HJ01
-
Customer Approval & Feedback
Approved by
2013/10/23
Prepared by
2013/10/23
LCD Sales & Marketing Team
Samsung Display Co., Ltd
1 page ————————————————————————————————————————————————–
2. ABSOLUTE MAXIMUM RATINGS
If the figures on measuring instruments exceed maximum ratings, it can cause the malfunction or the
unrecoverable damage on the device.
Item
Power supply voltage
Temperature for storage
(Temperature of glass surface)
Humidity for storage
Operating temperature
Operating humidity
Endurance on static electricity
Symbol
V
DD
T
STG
H
STG
T
OPR
H
STG
Min.
10.8
-20
5
0
20
Max.
13.2
65
90
50
90
150
Unit
V
C
%RH
C
%RH
V
Note
(1)
(2), (4)
(2), (5)
(3)
Note (1) The power supply voltage at Ta= 25 ± 2 °C
(2) Temperature and the range of relative humidity are shown in the figure below.
a. 90 % RH Max. (Ta ≤ 39 °C)
b. The relative humidity is 90% or less. (Ta >39 °C)
c. No condensation
(3) Keep the static electricity under 150V in process the polarizer is attached on glass.
(4) Storage condition with glass.
(5) Operating condition with assembly
(6) Condition without packing.(Unpacking condition)
Fig. Range for temperature and relative humidity (unpacking condition)
——————————————————————————————————————————————––—
Doc.No. LSC480HJ01
Page 5 of 37
Rev.No. 06-000-G-20131023
5 Page ————————————————————————————————————————————————–
Note (1) No connection: These PINS are used only for the product of SAMSUNG.
(DO NOT CONNECT the input device to these pins.)
Note (2) If set input is 8bit LVDS signal, Keep Echannel level „0‟
Pin No.24 / Pin No.40 : Pull up(3.3V) with 1.5kohm resistor.
Pin No.25 / Pin No.41 : Pull down(GND) with 1.5kohm resistor.
Note (3) Pin No. 1, 2, 3 are used only for I2C communication in flicker tuning.
(Refer to 10.5 Process Executing Guide)
Note (4) 3D format is set with Top/Bottom function only.
Note (5) Pin number which starts from the left side.
Fig . The diagram of connector
a. Power GND pins should be connected to the LCD‟s metal chassis.
b. All power input pins should be connected together.
c. All NC pins should be separated from other signal or power.
——————————————————————————————————————————————––—
Doc.No. LSC480HJ01
Page 11 of 37
Rev.No. 06-000-G-20131023
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet LSC480HJ01.PDF ] |
Número de pieza | Descripción | Fabricantes |
LSC480HJ01 | TFT LCD | Samsung |
LSC480HJ02 | TFT LCD | Samsung |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |