MDT13P02 Datasheet PDF - Micon Design Technology
| Part Number | MDT13P02 | |
| Description | 8-bit micro-controller | |
| Manufacturers | Micon Design Technology | |
| Logo |  |
|
|
There is a preview and MDT13P02 download ( pdf file ) link at the bottom of this page. Total 14 Pages | ||
Preview 1 page No Preview Available !
1. Features
MDT13P02
The followings are some of the features on the hardware and software :
Special designed MCU for USB+PS/2
Meet low-speed (1.5Mbps) USB spec Version 1.1
Support 1 device address and 3 endpoints
Working with Agilent ADNS-2610, ADNS-2620, ADNS-2051, ADNS-5020 or PixArt PAN101B, PAN3101
optical mouse sensor
Fully CMOS static design
8-bit data bus
On chip EPROM size: 2.5 K words
Internal RAM size: 80 bytes
37 single word instructions
14-bit instructions
8-level stacks
Operating voltage: 4.0 V ~ 5.25 V
External oscillator frequency: 6-MHz/18-MHz/24-MHz
Internal operation frequency: 12-MHz
Addressing modes include direct, indirect and relative addressing modes
Power-on Reset
Power edge-detector Reset
Sleep Mode for power saving
4 interrupt sources:
-TMR0 timer
-USB Endpoint 0
-USB Endpoint 1
-USB Endpoint 2
TMR0: 8-bit timer
2 types of oscillator can be selected by programming option:
XTAL－Standard crystal oscillator
HFXT－High frequency crystal oscillator
On-chip RC oscillator based Watchdog Timer (WDT)
16 I/O pins with their own independent direction control
This specification are subject to be changed without notice. Any latest information
please preview http;//www.mdtic.com.tw
P. 2
2007/8 Ver. 1.0
|
| |
 
MDT13P02
(1) IAR (Indirect Address Register): R00
Addressing this location will use the content of MSR to address data memory (not a physical register)
(2) TMR0: R01
(3) PC (Program Counter): R02, R0A
(4) STATUS (Status register): R03
Bit Symbol
0 C Carry bit
1 HC Half Carry bit
2 Z Zero bit
3 /PF Power down bit
4 /TF WDT timer overflow bit
5 RP0 Register Bank select bit
0: 00h~7Fh (Bank0)
1: 80h~FFh (Bank1)
7~6 -- General purpose bit
Function
(5) MSR (Memory Bank Select Register): R04
Memory Bank Select Register:
0: 00h~7Fh (Bank0)
1: 80h~FFh (Bank1)
b7 b6 b5 b4 b3 b2 b1 b0
(6) PORT A: R05
PA7~PA0, PORTA data register
(7) PORT B: R06
PB7~PB0, PORTB data register
Indirect Addressing Mode
(8) PCHLAT: R0A
Write buffer for the upper 4 bits of the Program counter
This specification are subject to be changed without notice. Any latest information
please preview http;//www.mdtic.com.tw
P. 6
2007/8 Ver. 1.0
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for MDT13P02 electronic component. |
| Information | Total 14 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ MDT13P02.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| MDT13P02 | The function is 8-bit micro-controller. Micon Design Technology | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
MDT1
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||