DataSheet.es    


PDF S50HW-YD04 Data sheet ( Hoja de datos )

Número de pieza S50HW-YD04
Descripción Wide Plasma Display Module
Fabricantes Samsung 
Logotipo Samsung Logotipo



Hay una vista previa y un enlace de descarga de S50HW-YD04 (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! S50HW-YD04 Hoja de datos, Descripción, Manual

Global LCD Panel Exchange Center
www.panelook.com
FOR MESSRS:
DATE : July 25, 2007
CUSTOMER’S SPECIFICATIONS
(Approval)
126.9cm(50 Inch) Wide Plasma Display Module
MODEL : S50HW-YD04
(NTSC/PAL)
* This specification will be approved by both Customer and Samsung SDI Co.,Ltd.
* Please return one of this specifications with your signature for approval.
Proposed by:
Signature
Vice President Sung Do, Kim
PDP Quality Innovation Team,
PDP Division, Samsung SDI Co., LTD
Approved by:
Signature
.
CONFIDENTIAL
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com

1 page




S50HW-YD04 pdf
Global LCD Panel Exchange Center
www.panelook.com
SamsungSDI Corporation
Module
Specification
Plasma Display
1 DESCRIPTION
This model is a 50-inch wide full color plasma display module with a resolution of
1,366(H) 768(V) pixels. The display module includes the Plasma Display Panel(PDP),
the Panel driving electronics and the Logic Controller.
2 FEATURES
x Wide aspect ratio(16:9) 50inch diagonal display screen. The display area is 1106.48
wide and 622.08 high.
x Slim and light weight. The display module is 63.6 in depth and weights only
approx.24.5 include power supply.
x 549755.81 million colors(13Bit), 68719.47 million colors(12Bit), 1073.7 million
colors(10Bit), or 16.77 million colors(8Bit) combination of R,G and B digital data.
x High brightness, High contrast, Wide viewing angle. The screen has a white peak
brightness of typical 950cd/ , contrast of typical 8,000:1 at 60Hz. And a viewing angle
of greater than 160 comparable to those of CRTs.
3 PRODUCT NAME AND MODEL NUMBER
x Product name : 50-inch Full Color Plasma Display Module (Abbreviation : PDP module)
x Model number : S50HW-YD04
4 FUNCTION OUTLINE
x The plasma display Module has an APC(Automatic Power Control) function which
restricts power consumption within the certain value with regard to each display load
ratio.
x The plasma display Module is operated by following digital video signals; Vertical
synchronous signal, Horizontal synchronous signal, DLCK and 8bits/10bits/12bits/13bits
data signal of each R,G, and B color. All signals are based on LVDS level.
x The plasma display Module is operated at 50Hz or 60Hz frame rate. An external frame
rate conversion is required in order to display the other formats.
x The PDP module requires several types of input voltage; voltage for LOGIC control
board, Y-driver board, X-driver board and address buffer board.
x The plasma display Module is operated at progressive signal only. An external
progressive scan conversion is required in order to display the other formats.
x The plasma display Module requires rated 100~240V, 50~60Hz of input power voltage.
Maximum input voltage rating is AC 90~264V.
Samsung SDI Confidential
- 5/45 -
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com

5 Page





S50HW-YD04 arduino
Global LCD Panel Exchange Center
www.panelook.com
SamsungSDI Corporation
Specification
Module
9 INTERFACE SIGNAL SPECIFICATION
Plasma Display
PDP Module uses an LVDS interface for the signal input. It is defined as like below.
For details, refer to the data sheets published by the LVDS transmitter IC maker.
9.1 Interface Connection Diagram
NOTE Do not connect or disconnect the LVDS connector when the system power is on.
Otherwise, the LVDS interface IC could be damaged.
The length of connecting LVDS cable between image board and logic board is
recommended not to be longer than 25.0cm.
9.2 Signal Definition and Function
A video signal (display data signal and control signal) is converted from parallel data to
serial data with the LVDS transmitter and further converted into four sets of differential
signals before input to this PDP module. These signals are transmitted seven times
faster than dot clock signals. The dot clock signal is converted into one set of
differential signals.
The LVDS signal definition and function are as follows in Italic:
9.2.1 8 Bit Definition
Symbol
RxIN0-
RxIN0+
RxIN1-
RxIN1+
LVDS1
RxIN2-
RxIN2+
RxIN3-
RxIN3+
RxCLKin-
RxCLKin+
SDA
SCL
I2C_READY
I/O Function
I Display Data Signal:
I R0, R1, R2, R3, R4, R5, G0
I Display Data Signal:
I G1, G2, G3, G4, G5, B0, B1
I Display Data Signal:
I B2, B3, B4, B5, Hsync, Vsync, DEN
I Display Data Signal:
I R6, R7, G6, G7, B6, B7
I Dot Clock Signal:
I CLK
I/O I2C serial data
I Clock signal for SDA
O I2C enable signal
Remarks
LVDS signal
LVDS signal
LVDS signal
LVDS signal
LVDS signal
LVDS signal
LVDS signal
LVDS signal
LVDS signal
LVDS signal
3.3V CMOS
3.3V CMOS
3.3V CMOS
Samsung SDI Confidential
- 11/45 -
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet S50HW-YD04.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
S50HW-YD01Wide Plasma Display ModuleSamsung
Samsung
S50HW-YD04Wide Plasma Display ModuleSamsung
Samsung

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar