|
|
PDF RT9511 Data sheet ( Hoja de datos )
| Número de pieza | RT9511 | |
| Descripción | Fully Integrated Battery Charger | |
| Fabricantes | Richtek Technology | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de RT9511 (archivo pdf) en la parte inferior de esta página. Total 24 Páginas | ||
|
No Preview Available !
RT9511
Fully Integrated Battery Charger with Two
Step-Down Converters
General Description
The RT9511 is a fully integrated low cost solution with a
single-cell Li-Ion battery charger and two high efficiency
step-down DC/DC converters ideal for portable
applications.
The Battery Charger is capable of being powered up from
AC adapter and USB (Universal Serial Bus) port inputs
which can automatically detect and select the AC adapter
and the USB port as the power source for the charger.
The Battery Charger enters sleep mode when both
supplies are removed. The Battery Charger optimizes the
charging task by using a control algorithm including
preconditioning mode, fast charge mode and constant
voltage mode. The charging task is terminated as the
charge current drops below the preset threshold. The USB
charge current can be selected from preset ratings100mA
and 500mA, while the AC adapter charge current can be
programmed up to 1A with an external resister. The internal
thermal feedback circuitry regulates the die temperature
to optimize the charge rate for all ambient temperatures.
The Battery Charger features 18V and 7V maximum rating
voltages for AC adapter and USB port inputs respectively.
The other features are external programmed safety timer,
under voltage protection, over voltage protection for AC
adapter supply, battery temperature monitoring and charge
status indicator.
The high-efficiency step-down DC/DC converter is capable
of delivering 1A output current over a wide input voltage
range from 2.5V to 5.5V, the step-down DC/DC converter
is ideally suited for portable electronic devices that are
powered from 1-cell Li-ion battery or from other power
sources such as cellular phones, PDAs and hand-held
devices. Two operating modes are available including :
PWM/Low-Dropout autoswitch and shut-down modes. The
Internal synchronous rectifier with low RDS(ON) dramatically
reduces conduction loss at PWM mode. No external
Schottky diode is required in practical application.
The RT9511 is available in a WQFN -24L 4x4 package.
Features
z Battery Charger
` Automatic Input Supplies Selection
` 18V Maximum Rating for AC Adapter
` Integrated Selectable 100mA and 500mA USB
Charge Current
` Internal Integrated Power FETs
` Charge Status Indicator
` External Capacitor Programmable Safety Timer
` Under Voltage Protection
` Over Voltage Protection
` Automatic Recharge Feature
` Battery Temperature Monitoring
` Thermal Feedback Optimizing Charge Rate
` Power Path Controller
z Step-Down DC/DC Converter
` Adjustable Output from 0.6V to VIN
` 1A Output Current
` 95% Efficiency
` No Schottky Diode Required
` 1.5MHz Fixed-Frequency PWM Operation
z Small 24-Lead WQFN Package
z RoHS Compliant and Halogen Free
Applications
z MP3/MP4 Player
z GPS
z Digital Photo Frame
z Hand held Device
Marking Information
For marking information, contact our sales representative
directly or through a Richtek distributor located in your
area.
DS9511-01 April 2011
www.richtek.com
1
1 page  
RRTT95915111FloFwloCwhaCrt hart
Start-Up
ACIN/USB
Power Up
V/CE > 1.4V ?
NO
VACIN < 4.3V
and
VUSB N<O3.9V?
Precharge Phase
Fast Charge Phase
Standby/Fault
YES
YES
DISABLE
MODE
PFET OFF
IBATT = 0
UVP MODE
PFET OFF
IBATT = 0
RT9511
Recharge Phase
NO
VACIN < VBATT
and
VUSB < VBATT?
NO
1ms Delay
&
Start Timer
YES
SLEEP MODE
PFET OFF
IBATT = 0
VTS > 2.5V
or
VTS < 0.5V?
NO
YES
VBATT > 2.8V?
YES
IBATT = 0.1 Charge
Current
NO /CHG_S Strong Pull
Down
IBATT = Charge
Current
/CHG_S Strong
Pull Down
YES
NO VBATT > 2.8V?
YES
OVP
MODE
TEMP
FAULT
/CHG_S HIGH
IMPEDANCE
RECHAR
GE
NO
VBATT > 4.1 V?
YES
YES
NO
IBATT < 0.1 ICHG?
YES
STANDBY
PFET OFF
IBATT = 0
VBATT > 4.1 V?
NO NO
? TCHARGE UP?
TCHARGE UP?
YES
YES
TIME
FAULT
DS9511-01 April 2011
www.richtek.com
5
5 Page 
RT9511
ISETU Threshold Voltage vs. USB Voltage
2.0
VBATT = 3.8V
1.6
Rising
1.2
0.8
Falling
0.4
0.0
4.5 4.8 5.1 5.4 5.7
6
USB Voltage (V)
6.3 6.6
ACIN Power On
Regulation Voltage vs. Temperature
4.26
ACIN = 5V, ICharger = 500mA
4.24
4.22
4.20
4.18
4.16
4.14
-25 -15 -5
5 15 25 35 45 55 65 75 85
Temperature (°C)
USB Power On
VACIN
(5V/Div)
VSYS
(5V/Div)
EN
(5V/Div)
IIN
(1A/Div)
VBATT = 3.7V, ISYS = 500mA, ICharger = 500mA
Time (1ms/Div)
VUSB
(5V/Div)
VSYS
(5V/Div)
EN
(5V/Div)
IUSB
(1A/Div)
VBATT = 3.7V, ISYS = 500mA, ICharger = 500mA
Time (1ms/Div)
VACIN
(5V/Div)
VSYS
(5V/Div)
VBATT
(5V/Div)
IIN
(1A/Div)
ACIN Power Off
ISYS = 500mA, ICharger = 500mA
Time (500μs/Div)
VUSB
(5V/Div)
VSYS
(5V/Div)
VBATT
(5V/Div)
IIN
(1A/Div)
USB Power Off
ISYS = 500mA, ICharger = 500mA
Time (500μs/Div)
DS9511-01 April 2011
www.richtek.com
11
11 Page | ||
| Páginas | Total 24 Páginas | |
| PDF Descargar | [ Datasheet RT9511.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| RT9511 | Fully Integrated Battery Charger | Richtek Technology |
| RT9513 | Linear Single Cell Li-Ion Battery Charger IC | Richtek Technology |
| RT9514 | Linear Single Cell Li-Ion Battery Charger IC | Richtek Technology |
| RT9515 | Linear Single Cell Li-Ion Battery Charger IC | Richtek Technology |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |