DataSheetWiki


APL5930 fiches techniques PDF

ANPEC - Ultra Low Dropout (0.23V Typical) Linear Regulator

Numéro de référence APL5930
Description Ultra Low Dropout (0.23V Typical) Linear Regulator
Fabricant ANPEC 
Logo ANPEC 





1 Page

No Preview Available !





APL5930 fiche technique
APL5930
3A, Ultra Low Dropout (0.23V Typical) Linear Regulator
Features
General Description
Compatible with APL5913
The APL5930 is a 3A ultra low dropout linear regulator.
Ultra Low Dropout
The IC needs two supply voltages, one is a control voltage
- 0.23V(typical) at 3A Output Current
Low ESR Output Capacitor (Multi-layer
Chip Capacitors (MLCC)) Applicable
0.8V Reference Voltage
High Output Accuracy
(V ) for the control circuitry, the other is a main supply
CNTL
voltage (VIN) for power conversion, to reduce power dissi-
pation and provide extremely low dropout voltage.
The APL5930 integrates many functions. A Power-On-
Reset (POR) circuit monitors both supply voltages on
VCNTL and VIN pins to prevent erroneous operations.
- ±1.5% over Line, Load, and Temperature Range The functions of thermal shutdown and current-limit pro-
Fast Transient Response
tect the device against thermal and current over-loads. A
Adjustable Output Voltage
POK indicates the output voltage status with a delay time
Power-On-Reset Monitoring on Both VCNTL and set internally. It can control other converter for power
VIN Pins
sequence. The APL5930 can be enabled by other power
Internal Soft-Start
systems. Pulling and holding the EN voltage below 0.4V
Current-Limit and Short Current-Limit Protections shuts off the output.
The APL5930 is available in a SOP-8P package which
Thermal Shutdown with Hysteresis
features small size as SOP-8 and an Exposed Pad to
Open-Drain VOUT Voltage Indicator (POK)
reduce the junction-to-case resistance to extend power
Low Shutdown Quiescent Current (<30 µA)
range of applications.
Shutdown/Enable Control Function
Simple SOP-8P Package with Exposed Pad
Applications
Lead Free and Green Devices Available
Front Side Bus VTT (1.2V/3A)
(RoHS Compliant)
Note Book PC Applications
Motherboard Applications
Pin Configuration
Simplified Application Circuit
GND 1
FB 2
VOUT 3
VOUT 4
8 EN
7 POK
6 VCNTL
5 VIN
SOP-8P (Top View)
= Exposed Pad
(connected to VIN plane for better heat dissipation)
POK
EN
Enable
VCNTL
POK VIN
VOUT
APL5930
EN FB
GND
VCNTL
VIN
VOUT
Optional
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and
advise customers to obtain the latest version of relevant information to verify before placing orders.
Copyright © ANPEC Electronics Corp.
Rev. A.4 - Sep., 2009
1
www.anpec.com.tw

PagesPages 17
Télécharger [ APL5930 ]


Fiche technique recommandé

No Description détaillée Fabricant
APL5930 Ultra Low Dropout (0.23V Typical) Linear Regulator ANPEC
ANPEC
APL5932A Ultra Low Dropout (0.3V Typical) Linear Regulator ANPEC
ANPEC
APL5932B Ultra Low Dropout (0.3V Typical) Linear Regulator ANPEC
ANPEC
APL5932C Ultra Low Dropout (0.3V Typical) Linear Regulator ANPEC
ANPEC

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche