PDF MS79005 Data sheet ( Hoja de datos )

Número de pieza	MS79005
Descripción	PRESSURE SENSOR DIE
Fabricantes	Intersema
Logotipo
Hay una vista previa y un enlace de descarga de MS79005 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas
No Preview Available ! MS79005 PRESSURE SENSOR DIE (0-0.5 BAR) • 0 to 50 kPa range (500 mbar or 7.5 PSI) • Absolute/differential pressure sensors • RoHS-compatible & Pb-free1 DESCRIPTION The sensor element of the MS79005 consists of a silicon micro-machined membrane. Implanted resistors make use of the piezo-resistive effect to sense the membrane deflection and transform it in an electrical signal. This sensor, which has outstanding linearity and span values, is available in various configurations. The absolute pressure sensor employs a sealed vacuum reference cavity underneath the membrane. The Pyrex glass wafer used for this sealing has a thickness of 0.2 mm (MS79005-A_0.2) or 0.5 mm (MS79005-A_0.5). Two gauge versions available: one with a drilled Pyrex glass (MS79005-D) and the other without Pyrex glass (MS79005-S). FEATURES • Uncompensated pressure sensor die • Output Span 150mV @ 5V • Temperature Range -40°…+125°C • Linearity 0.05% (typical) • Very small Die Size 1.78 x 1.78mm (MS79005-A) • Low Cost, High reliability APPLICATION • For absolute or differential pressure sensor systems • Variometers ELECTRICAL CONNECTIONS Positive output for pressure applied topside Vs+ / EPI Out+ Out- R5+ R6+ GND1 GND2 R5- R6- R5 and R6 are placed on bulk Vs+ : Supply voltage of Wheatstone bridge Epi : Connection of epitaxial layer (membrane) Out- : Negative output Out+ : Positive output GND1 : Ground GND2 : Ground R5+ : Reference Resistor 5: positive access R5- : Reference Resistor 5: negative access R6+ : Reference Resistor 6: positive access R6- : Reference Resistor 6: negative access 1 The European RoHS directive 2002/95/EC (Restriction of the use of certain Hazardous Substances in electrical and electronic equipment) bans the use of lead, mercury, cadmium, hexavalent chromium and polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). DA79005_000.doc 000790051447 ECN 1186 May 07, 2009 1/5 1 page ORDERING INFORMATION Product Code MS79005-A_0.2 MS79005-A_0.5 MS79005-D MS79005-S Type Product Absolute 0.5 bar Pressure Sensors 0.2 mm Pyrex sawn on b/f Absolute 0.5 bar Pressure Sensors 0.5 mm Pyrex sawn on b/f Differential 0.5 bar Pressure Sensors sawn on b/f Differential 0.5 bar Pressure Sensors sawn on b/f Art.-Nr. 7900525022 7900525021 7900525121 7900525221 The MS79005 dice are supplied sawn on blue foil, mounted on plastic rings. FACTORY CONTACTS Factory and European Sales office Intersema Sensoric SA Ch. Chapons-des-Prés 11 CH-2022 Bevaix Switzerland Phone: Fax: e-mail: Website: +41 32 847 9550 +41 32 847 9569 www.intersema.ch USA Measurement Specialties Inc. 1000 Lucas Way Hampton, VA 23666 USA Phone: Fax: e-mail: Website: +1 800 555 1551 +1 757 766 4297 [email protected] www.meas-spec.com ASIA Measurement Specialties (China), Ltd. F1.6-4D, Tian An Development Compound Shenzhen, China 518048 Phone: Fax: e-mail: Website: +86 755 8330 1004 +86 755 8330 6797 [email protected] www.meas-spec.com NOTICE Intersema reserves the right to make changes to the products contained in this data sheet in order to improve the design or performance and to supply the best possible products. Intersema assumes no responsibility for the use of any circuits shown in this data sheet, conveys no license under any patent or other rights unless otherwise specified in this data sheet, and makes no claim that the circuits are free from patent infringement. Applications for any devices shown in this data sheet are for illustration only and Intersema makes no claim or warranty that such applications will be suitable for the use specified without further testing or modification. DA79005_000.doc 000790051447 ECN 1186 May 07, 2009 5/5 5 Page

Páginas	Total 5 Páginas
PDF Descargar	[ Datasheet MS79005.PDF ]

Hoja de datos destacado

Número de pieza	Descripción	Fabricantes
MS79005	PRESSURE SENSOR DIE	Intersema

Número de pieza	Descripción	Fabricantes
SLA6805M	High Voltage 3 phase Motor Driver IC.	Sanken
SDC1742	12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.	Analog Devices

DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.

DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar