|
|
Número de pieza | MS7902 | |
Descripción | PRESSURE SENSOR DIE | |
Fabricantes | Intersema | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MS7902 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! MS7902
PRESSURE SENSOR DIE (0-2 BAR)
• 0 to 200 kPa range (2 bar or 29 PSI)
• Absolute/differential pressure sensors
• High linearity, small size
• RoHS-compatible & Pb-free1
DESCRIPTION
The sensor element of the MS7902 consists of a silicon micro-machined membrane. Implanted resistors make
use of the piezo-resistive effect to sense the membrane deflection and transform it in an electrical signal. This
sensor, which has outstanding linearity and span values, is available in various configurations. The absolute
pressure sensor employs a sealed vacuum reference cavity underneath the membrane. The Pyrex glass wafer
used for this sealing has a thickness of 0.2 mm (MS7902-A_0.2) or 0.5 mm (MS7902-A_0.5). There are two
gauge versions available: one with a drilled Pyrex glass (MS7902-D) and the other without Pyrex glass
(MS7902-S).
FEATURES
• Uncompensated pressure sensor die
• Output span 150mV @ 5V
• Temperature range -40°…+125°C
• Linearity 0.05% (typical)
• Very small die size 1.72 x 1.58 mm (MS7902-A)
• Low cost, high reliability
APPLICATION
• Absolute pressure sensor systems
• Differential/gauge pressure sensor systems
• Engine controls
• Dive computers
ELECTRICAL CONNECTIONS
Positive output for pressure applied topside
Vs+ EPI
Out+
Out-
Vs+ : Supply voltage of Wheatstone bridge
Epi : Connection of epitaxial layer (membrane)
Out- : Negative output
Out+ : Positive output
GND1 : Ground
GND2 : Ground
GND1 GND2
1 The European RoHS directive 2002/95/EC (Restriction of the use of certain Hazardous Substances in electrical and electronic equipment)
bans the use of lead, mercury, cadmium, hexavalent chromium and polybrominated biphenyls (PBB) or polybrominated diphenyl ethers
(PBDE).
DA7902_000.doc
000079021446
ECN 1186
March 13, 2009
1/5
1 page ORDERING INFORMATION
Product Code
MS7902-A_0.2
MS7902-A_0.5
MS7902-D
MS7902-S
Type
Absolute
Absolute
Differential
Differential
Product
2 bar Pressure Sensors 0.2 mm Pyrex sawn on b/f
2 bar Pressure Sensors 0.5 mm Pyrex sawn on b/f
2 bar Pressure Sensors sawn on b/f
2 bar Pressure Sensors no Pyrex sawn on b/f
The MS7902 dice are supplied sawn on blue foil, mounted on plastic rings.
FACTORY CONTACTS
Art.-Nr.
790225022
790225021
790225121
790225221
Factory and European Sales office
Intersema Sensoric SA
Ch. Chapons-des-Prés 11
CH-2022 Bevaix
Switzerland
Phone:
Fax:
e-mail:
Website:
+41 32 847 9550
+41 32 847 9569
www.intersema.ch
USA
Measurement Specialties Inc.
1000 Lucas Way
Hampton, VA 23666
USA
Phone:
Fax:
e-mail:
Website:
+1 800 555 1551
+1 757 766 4297
www.meas-spec.com
ASIA
Measurement Specialties (China), Ltd.
F1.6-4D, Tian An Development
Compound
Shenzhen, China 518048
Phone:
Fax:
e-mail:
Website:
+86 755 8330 1004
+86 755 8330 6797
www.meas-spec.com
NOTICE
Intersema reserves the right to make changes to the products contained in this data sheet in order to improve the design or performance
and to supply the best possible products. Intersema assumes no responsibility for the use of any circuits shown in this data sheet, conveys
no license under any patent or other rights unless otherwise specified in this data sheet, and makes no claim that the circuits are free from
patent infringement. Applications for any devices shown in this data sheet are for illustration only and Intersema makes no claim or
warranty that such applications will be suitable for the use specified without further testing or modification.
DA7902_000.doc
000079021446
ECN 1186
March 13, 2009
5/5
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet MS7902.PDF ] |
Número de pieza | Descripción | Fabricantes |
MS79005 | PRESSURE SENSOR DIE | Intersema |
MS7901 | PRESSURE SENSOR DIE | Intersema |
MS7902 | PRESSURE SENSOR DIE | Intersema |
MS7904 | PRESSURE SENSOR DIE | Intersema |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |