OPB755TZ Datasheet PDF - OPTEK Technologies
| Part Number | OPB755TZ | |
| Description | Reflective Object Sensor | |
| Manufacturers | OPTEK Technologies | |
| Logo |  |
|
|
There is a preview and OPB755TZ download ( pdf file ) link at the bottom of this page. Total 4 Pages | ||
Preview 1 page No Preview Available !
Reflective Object Sensor
OPB750N, OPB750T
OPB755NZ, OPB755TZ, OPB755TAZ
Features:
• High contrast ratio (1,000 :1 minimum)
• Low cost plastic housing
• PCBoard mount (OPB750N, OPB750T)
• 12” (305 mm) 26 AWG wires (OPB755NZ, OPB755TZ)
• Available with no-mounting tabs “N” package
• Available with two mounting tabs “T” package
OPB750
Product Photo Here
OPB755TAZ OPB755TZ
Description:
Each sensor in the OPB750 and OPB755 series has a reflective assembly that features a Light
Emitting Diode (LED) and phototransistor output designed to decrease low-level light, while not
affecting the high-level light gain.
The OPB750N and OPB750T devices have are designed for PCBoard mounting with 0.40” (10 mm)
length leads. OPB755NZ, OPB755TZ and OPB755TAZ assemblies are designed for remote
mounting. The OPB755NZ and OPB755TZ have 12” (305 mm) UL rated wire, 26 AWG wire leads
that terminate into an AMP # 3-640442-5 connector. The OPB755TAZ has 24” (610 mm) UL rated
wire, 26 AWG leads. The OPB750T, OPB755TZ and OPB755TAZ have two mounting tabs while
the OPB750N and OPB755NZ have no mounting tabs.
Photologic® output versions are available with the OPB760 and OPB770 series.
Custom electrical, wire and cabling and connectors are available. Contact your local representative
or OPTEK for more information.
Applications:
• Non-contact reflective object
sensor
• Assembly line automation
• Machine automation
• Machine safety
• End of travel sensor
Ordering Information
Part
Number
LED Peak
Reflection Distance
Wavelength Sensor
Inch
0.080" (2.03 mm)
OPB750N
0.150" (3.81 mm)
890 nm
Transistor
& Rbe
0.220" (5.59 mm)
0.080" (2.03 mm)
OPB750T
0.150" (3.81 mm)
0.220" (5.59 mm)
0.080" (2.03 mm)
OPB755NZ
0.150" (3.81 mm)
0.220" (5.59 mm)
OPB755TZ
890 nm
Transistor
& Rbe
0.080" (2.03 mm)
0.150" (3.81 mm)
0.220" (5.59 mm)
0.080" (2.03 mm)
OPB755TAZ
0.150" (3.81 mm)
0.220" (5.59 mm)
Lead
Length
0.40"
12" / 26
AWG Wire
with
connector
24" / 26
AWG Wire
NO
connector
Tabs
No tabs
2 Tabs
No tabs
2 Tabs
RoHSOPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected]
Issue A.3 05/08
Page 1 of 4
|
| |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for OPB755TZ electronic component. |
| Information | Total 4 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ OPB755TZ.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| OPB755T | The function is Reflective Object Sensor. OPTEK Technologies | |
| OPB755TAZ | The function is Reflective Object Sensor. OPTEK Technologies | |
| OPB755TZ | The function is Reflective Object Sensor. OPTEK Technologies | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
OPB7
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||