|
|
PDF MD22292-B0 Data sheet ( Hoja de datos )
| Número de pieza | MD22292-B0 | |
| Descripción | QUXGA-Wide Color TFT/LCD Monitor | |
| Fabricantes | IDTech | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MD22292-B0 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
Engineering Specification
Engineering Specification
Type 22.2 QUXGA-Wide Color TFT/LCD Monitor
Model Name:MD22292 B0
Document Control Number : OEM I-MD22292 B0-03
Note:Specification is subject to change without notice. Consequently it is better to contact to
International Display Technology before proceeding with the design
of your product incorporating this module.
Sales Support
International Display Technology
(C) Copyright International Display Technology 2001,2002 All Rights reserved.
April 22,2002
OEM I-MD22292 B0-03
1/62
1 page  
Engineering Specification
1.0 Handling Precautions
O Do not exert strong pressure to the surface of the monitor screen. You may break the LCD panel.
O Do not place heavy objects on top of this product. They may damage the monitor.
O Do not touch the monitor screen with your fingers. Fingerprints and oil stains may remain on the
screen surface. They are difficult to wipe off.
O The monitor is heavy. Ask the help of others if you cannot carry it by yourself.
O When leaving your office for a long vacation, always unplug the power cords from the main outlet.
O The liquid crystals in the display panel contain several irritants. If the panel is damaged or broken, do
not let the liquid come in contact with your skin, eyes, or mouth. If you do come in contact with the
liquid, flush the affected part with running water for at least 15 minutes. If any symptom remains,
consult a doctor.
O The fluorescent lamp in the liquid crystal display (LCD) contains mercury (50 mg. (0.002 oz.)
maximum). Do not place in trash that is disposed of in landfills. Dispose of it as required by local
ordinances or regulations.
O The front polarizer can be easily damaged. Take care not to scratch the front surface with any hard or
abrasive material. Dust, finger marks, grease etc. can be removed with a soft damp cloth (a small amount
of mild detergent can be used on the damp cloth). Do not apply water or detergent directly to the front
surface as this may cause staining or damage the electronic components.
O Never use any solvent on the front polarizer or module as this may cause permanent damage.
O Do not open or modify the monitor assembly.
O Continuous operation of the monitor with the same screen content may result in some image sticking.
Over 10 hours operation with the same content is not recommended.
O Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
O When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
O The information contained herein is presented only as a guide for the applications of our
products. No responsibility is assumed by International Display Technology for any
infringements of patents or other right of the third partied which may result from its use. No
license is granted by implication or otherwise under any patent or patent rights of International
Display Technology or others.
O The information contained herein may be changed without prior notice. It is therefore
advisable to contact International Display Technology before proceeding with the design of
equipment incorporating this product.
(C) Copyright International Display Technology 2001,2002 All Rights reserved.
April 22,2002
OEM I-MD22292 B0-03
5/62
5 Page 
Engineering Specification
3.0 Function Elements Descriptions
3.1 Color TFT-LCD Module
The summary of Front of Screen specification of the complete system is shown below.
3.1.1 Summary of Type 22.2 QUXGA-Wide Module
Screen Diagonal [cm]
Pixels H x V
Active Area [mm]
Pixel Pitch [mm]
Pixel Arrangement
Display Mode
Supported Color
White Luminance [cd/m2]
Contrast Ratio
Optical Rise+Fall Time [msec]
Color Point (x, y)
Viewing Angle Range[degree]
56.4 (22.2 inch)
3840(H) x 2400(V)
478.1(H) x 298.8(V)
0.1245 x 0.1245
R,G,B Sub-pixel Vertical Stripe
Dual Domain IPS, Normally Black
16M (RGB 8-bit each)
235 typ.
400 : 1 typ.(In the Dark room)
50 typ.
0.313, 0.329
+/- 85 typ. (Horizontal, Vertical) (10:1 CR)
3.1.2 Test Conditions
1. The backlight on, the brightness control set to maximum.
2. In a dark room
3. At 25 +/- 3 degree C
4. At a nominal input voltage
5. A photometer shall measure an area at the center of LCD that is larger than a single pixel. Viewing
direction is normal to the surface of the LCD.
6. Input signal timing listed in typical of "5.3,Interface Timings" .
3.1.3 Image Stabilizing Time
The image will begin to be visible within 3 seconds of application of power and input signals. The image will be
stabilized within 10 seconds of application of power and input signals. "stabilized" means that using the unaided
eyes, no significant change will occur in terms of the image quality specifications, such as luminance, uniformity,
color, and so on. The light output will meet the brightness specifications after 60 minutes of the application of
power and input signals.
(C) Copyright International Display Technology 2001,2002 All Rights reserved.
April 22,2002
OEM I-MD22292 B0-03
11/62
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet MD22292-B0.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MD22292-B0 | QUXGA-Wide Color TFT/LCD Monitor | IDTech |
| MD22292-B2 | QUXGA-Wide Color TFT/LCD Monitor | IDTech |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |