|
|
PDF TQ2SA-3V Data sheet ( Hoja de datos )
| Número de pieza | TQ2SA-3V | |
| Descripción | SMD RELAYS | |
| Fabricantes | Panasonic | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de TQ2SA-3V (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
TQ SMD
TESTING
LOW-PROFILE
TQ SMD RELAYSSURFACE-MOUNT RELAY
14
.551
9
.354
5.6
.220
mm inch
RoHS Directive compatibility information
http://www.nais-e.com/
FEATURES
• Low-profile: 6 mm .236 inch
(Tape height: max. 6.5 mm .256 inch)
• Tape and reel package is available as standard packing style
• Surge withstand between contacts and coil: 2,500 V
• Breakdown voltage between contacts and coil: 1,500 V
• Capacity: 2 A
• High sensitivity:
2 Form C; 140 mW power consumption (Single side stable type)
SPECIFICATIONS
Contact
Arrangement
2 Form C
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A)
75 mΩ
Contact material
Au-clad AgNi type
Nominal switching capacity
(resistive load)
2 A 30 V DC,
0.5 A 125 V AC
Rating
Max. switching power
(resistive load)
Max. switching voltage
60 W, 62.5 VA
220 V DC, 125 V AC
Max. switching current
2A
Min. switching capacity
(Reference value)#1
10 µA 10 mV DC
Nominal
operating
power
Single side stable
1 coil latching
140 mW (1.5 to 12 V DC)
200 mW (24 V DC)
300 mW (48 V DC)
70 mW (1.5 to 12 V DC)
100 mW (24 V DC)
2 coil latching
140 mW (1.5 to 12 V DC)
200 mW (24 V DC)
Mechanical (at 180 cpm)
108
Expected
life (min.
operations)
Electrical
(at 20 cpm)
2 A 30 V DC
resistive
1 A 30 V DC
resistive
105
2×105
0.5 A 125 V AC
resistive
105
Note:
#1 This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the
actual load. (SX relays are available for low level load switching [10V DC, 10mA
max. level])
Remarks
* Specifications will vary with foreign standards certification ratings.
*1 Measurement at same location as “Initial breakdown voltage” section.
*2 By resistive method, nominal voltage applied to the coil; contact carrying current:
2 A.
*3 Nominal voltage applied to the coil, excluding contact bounce time.
*4 Nominal voltage applied to the coil, excluding contact bounce time without diode.
*5 Half-wave pulse of sine wave: 6 ms; detection time: 10 µs
*6 Half-wave pulse of sine wave: 6 ms
*7 Detection time: 10 µs
*8 Refer to 6. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT .
Characteristics
Initial insulation resistance*1
Initial
breakdown
voltage
Between open
contacts
Between contact sets
Between contact and
coil
Initial surge
voltage
Between open
contacts
(10×160 µs)
Between contacts and
coil (2×10 µs)
Temperature rise*2 (at 20°C)
Operate time [Set time]*3 (at 20°C)
Release time [Reset time]*4
(at 20°C)
Shock resistance
Functional*5
Destructive*6
Functional*7
Vibration resistance
Destructive
Conditions for
operation, transport
and storage*8
(Not freezing and
condensing at low
temperature)
Unit weight
Ambient
temperature
Humidity
Min. 1,000 MΩ (at 500 V DC)
1,000 Vrms for 1 min.
(Detection current: 10 mA)
1,500 Vrms for 1 min.
(Detection current: 10 mA)
1,500 Vrms for 1 min.
(Detection current: 10 mA)
1,500 V (FCC Part 68)
2,500 V (Telcordia)
Max. 50°C
Max. 4 ms [Max. 4 ms]
Max. 4 ms [Max. 4 ms]
Min. 750 m/s2 {75 G}
Min. 1,000 m/s2 {100 G}
200 m/s2 {20G}, 10 to 55 Hz
at double amplitude of 3.3 mm
294 m/s2 {30G}, 10 to 55 Hz
at double amplitude of 5 mm
–40°C to +85°C*3
–40°F to +185°F
5 to 85% R.H.
Approx. 2 g .071 oz
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
1 page  
TQ SMD
13.-(1) Influence of adjacent mounting
Tested sample: TQ2SA-12V, 5 pcs.
10 ON ON
Pick-up voltage
0
–10 ON
10 OFF OFF
Drop-out voltage
0
–10 OFF
0123456
.039 .079 .118 .157 .197 .236
Inter-relay distance , mm inch
13.-(2) Influence of adjacent mounting
Tested sample: TQ2SA-12V, 6 pcs.
10 ON
Pick-up voltage
0
ON
–10
ON
10 OFF
Drop-out voltage
0
OFF
–10
OFF
01 23 45 6
.039 .079 .118 .157 .197 .236
Inter-relay distance , mm inch
13.-(3) Influence of adjacent mounting
Tested sample: TQ2SA-12V, 6 pcs.
10 ON
Pick-up voltage
0 ON
–10 ON
ON
10 OFF
Drop-out voltage
0 OFF
–10 OFF
OFF
0123456
.039 .079 .118 .157 .197 .236
Inter-relay distance , mm inch
14. Pulse dialing test
Tested sample: TQ2SA-12V, 6 pcs.
(35 mA 48 V DC wire spring relay load)
Circuit
+ 458 Ω
0.08
µF
0.08
µF
48 V DC
–
458 Ω
Wire spring relay
TQ-SMD
3 relay
2
Change of pick-up and drop-out voltage
(mounting by IRS method)
100
90
80
70
60
50
40
30
20
10
0
IRS
Pick-up voltage
Max.
Min.
Drop-out voltage
Max.
Min.
10 20 30 40 50
No. of operations, ×104
Change of contact resistance
(mounting by IRS method)
100
90
80
70
60
50
40
30
20
10
0
IRS
10 20 30 40
No. of operations, ×104
Max.
Min.
50
NOTES
1. Packing style
1) The relay is packed in a tube with the
relay orientation mark on the left side, as
shown in the figure below.
Orientation (indicates PIN No.1)stripe
Stopper (gray)
Stopper (green)
2) Tape and reel packing (surface-mount
terminal type)
(1) Tape dimensions
(i) SA type
mm inch
Relay polarity bar
4.0 ±0.1
(Z type)
0.4 ±0.1
.016 ±.004
1.5
+0.1
0
dia.
.157 ±.004
1.75 ±0.1
.059
+.004
0
dia.
2.0±0.1 .069 ±.004
.079±.004
11.5 ±0.1
.453 ±.004
14.6±0.1
.575±.004
6.3 ±0.2
.248 ±.008
TQ-SMD relays
2.0
+0.1
0
dia.
.079
+.004
0
dia.
16.0±0.1
.630±.004
12.3 ±0.1
.484 ±.004
Tape coming out direction
24.0 ±0.3
.945 ±.012
(ii) SL, SS type
mm inch
Relay polarity bar
(Z type)
0.4 ±0.1
.016 ±.004
1.5
+0.1
0
dia.
.059
+.004
0
dia.
4.0 ±0.1
.157 ±.004
1.75 ±0.1
2.0±0.1 .069 ±.004
.079±.004
11.5 ±0.1
.453 ±.004
14.6±0.1
.575±.004
7.8 ±0.2
2.0
+0.1
0
dia.
16.0±0.1
12.3 ±0.1
24.0 ±0.3
.307 ±.008
TQ-SMD relays
.079
+.004
0
dia.
.630±.004
Tape coming out direction
Note) *SS type
.484±.004 .945 ±.012
(10.1 ±0.1
.398 ±.004)*
(2) Dimensions of plastic reel
21 ±0.8
.827±.031
mm inch
2.0±0.5
.079±.020
100±1 dia.
3.937±.039 dia.
13 ±0.2
.512±.008
24.4+02
.961+0.079
330±2 dia.
12.992±.079 dia.
2.0±0.2
.079±.008
For Cautions for Use, see Relay Technical Information.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet TQ2SA-3V.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TQ2SA-3V | SMD RELAYS | Panasonic |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |