|
|
Numéro de référence | MTFDDAK120MAV | ||
Description | M500 2.5-Inch SATA NAND Flash SSD | ||
Fabricant | Micron | ||
Logo | |||
1 Page
M500 2.5-Inch NAND Flash SSD
Features
M500 2.5-Inch SATA NAND Flash SSD
MTFDDAK120MAV, MTFDDAK240MAV,
MTFDDAK480MAV, MTFDDAK960MAV
Features
• Micron® 20nm MLC NAND Flash
• RoHS-compliant package
• SATA 6 Gb/s interface
• TCG/Opal 2.0-compliant self-encrypting drive
(SED)
• Hardware-based AES-256 encryption engine
• ATA modes supported
– PIO mode 3, 4
– Multiword DMA mode 0, 1, 2
– Ultra DMA mode 0, 1, 2, 3, 4, 5
• Industry-standard, 512-byte sector size support
• Hot-plug/hot-remove capable
• Power loss protection for data-at-rest
• Device Sleep (DEVSLP), extreme low-power mode
• Native command queuing support with 32-com-
mand slot support
• ATA-8 ACS2 command set compliant
• ATA security feature command set and password
login support
• Secure erase (data page) command set: fast and se-
cure erase
• Sanitize device feature set support
• Self-monitoring, analysis, and reporting technology
(SMART) command set
• Windows 8 drive telemetry
• Adaptive thermal monitoring
• Power loss protection for data-at-rest
• Performance1, 2
– PCMark® Vantage (HDD test suite score): Up to
80,000
– Sequential 128KB READ: Up to 500 MB/s
– Sequential 128KB WRITE: Up to 400 MB/s
– Random 4KB READ: Up to 80,000 IOPS
– Random 4KB WRITE: Up to 80,000 IOPS
– READ/WRITE latency: 5ms/25ms (MAX)
• Reliability
– MTTF: 1.2 million device hours3
– Static and dynamic wear leveling
– Uncorrectable bit error rate (UBER): <1 sector
per 1015 bits read
• Low power consumption
– 150mW TYP4
• Endurance: Total bytes written (TBW) – Up to
500TB5
• Capacity6 (unformatted): 120GB, 240GB, 480GB,
960GB
• Mechanical
– SATA connector: 5V ±10%
– 2.5-inch drive: 100.45mm x 69.85mm x 7.0mm
– Weight: 70g (MAX)
• Secure firmware update with digitally signed firm-
ware image
• Operating temperature
– Commercial (0°C to +70°C)7
Notes:
1. Typical I/O performance numbers as meas-
ured fresh-out-of-the-box (FOB) using Iome-
ter with a queue depth of 32 and write
cache enabled.
2. 4KB transfers used for READ/WRITE latency
values.
3. The product achieves a mean time to failure
(MTTF) based on population statistics not
relevant to individual units.
4. Active average power measured during exe-
cution of MobileMark® with DIPM (device-
initiated power management) enabled.
5. Endurance may depend highly on the na-
ture of the data stream from the host com-
puter. See Endurance section for more de-
tails.
6. 1GB = 1 billion bytes; formatted capacity is
less.
7. Drive onboard temperature sensor.
Warranty: Contact your Micron sales representative
for further information regarding the product,
including product warranties.
PDF: 09005aef84fed121
m500_2_5_ssd.pdf - Rev. G 8/14 EN
1 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2013 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.
|
|||
Pages | Pages 30 | ||
Télécharger | [ MTFDDAK120MAV ] |
No | Description détaillée | Fabricant |
MTFDDAK120MAV | M500 2.5-Inch SATA NAND Flash SSD | Micron |
US18650VTC5A | Lithium-Ion Battery | Sony |
TSPC106 | PCI Bus Bridge Memory Controller | ATMEL |
TP9380 | NPN SILICON RF POWER TRANSISTOR | Advanced Semiconductor |
www.DataSheetWiki.com | 2020 | Contactez-nous | Recherche |