|
|
PDF MTFDDAA064MAM Data sheet ( Hoja de datos )
| Número de pieza | MTFDDAA064MAM | |
| Descripción | C400v 1.8-Inch SATA NAND Flash SSD | |
| Fabricantes | Micron | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MTFDDAA064MAM (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
C400v 1.8-Inch NAND Flash SSD
Features
C400v 1.8-Inch SATA NAND Flash SSD
MTFDDAA064MAM
Features
• Micron® 25nm MLC NAND Flash
• RoHS-compliant package
• SATA 6 Gb/s interface
• ATA modes supported
– PIO mode 3, 4
– Multiword DMA mode 0, 1, 2
– Ultra DMA mode 0, 1, 2, 3, 4, 5
• Industry-standard, 512-byte sector size support
• Hot-plug capable
• Native command queuing support with 32-com-
mand slot support
• ATA-8 ACS2 command set compliant
• ATA security feature command set and password
login support
• Security erase (data page) command set: fast and
secure erase
• Self-monitoring, analysis, and reporting technology
(SMART) command set
• Performance1, 2
– Sequential 128KB read: up to 500 MB/s
– Sequential 128KB write: up to 95 MB/s
– Random 4KB read: up to 45,000 IOPS
– Random 4KB write: up to 20,000 IOPS
– PCMark® Vantage (HDD test suite score): up to
65,000
– READ/WRITE latency: 55µs
• Reliability
– MTTF: 1.2 million device hours3
– Static and dynamic wear leveling
– Uncorrectable bit error rate (UBER): <1 sector
per 1015 bits read
• Low power consumption
– <200mW TYP4
• Endurance: total bytes written (TBW) – 36TB
• Capacity5 (unformatted): 64GB
• Mechanical: 5mm height
– Micro SATA connector: 3.3V ±5%
– 1.8-inch drive: 78.5mm x 54mm x 5mm
– Weight: 45g (MAX)
• Field-updateable firmware
• Operating temperature:
– Commercial (0°C to +70°C)6
Notes:
1. Typical I/O performance numbers as meas-
ured using Iometer with a queue depth of
32 and write cache enabled.
2. 4KB transfers used for READ/WRITE latency
values.
3. The product achieves a mean time to failure
(MTTF) based on population statistics not
relevant to individual units.
4. Active power measured during execution of
MobileMark® 2007 with device-initiated
power management (DIPM) enabled.
5. 1GB = 1 billion bytes; formatted capacity is
less.
6. Drive case temperature.
Warranty: Contact your Micron sales representative
for further information regarding the product,
including product warranties.
PDF: 09005aef84559b26
c400v_1_8.pdf - Rev. F 11/13 EN
1 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.
1 page  
C400v 1.8-Inch NAND Flash SSD
Interface Connectors
Interface Connectors
The SATA signal segment interface cable has four conductors and three ground connec-
tions. As shown in Package Dimensions, the cable includes a 7-pin signal segment and a
9-pin power segment arranged in a single row with a 1.27mm (0.050in) pitch.
Table 3: SATA Signal Segment Pin Assignments
Signal Name
S1
S2
S3
S4
S5
S6
S7
Type
GND
A
A#
GND
B#
B
GND
Description
Ground
Differential signal pair A and A#
Ground
Differential signal pair B and B#
Ground
Table 4: 1.8-Inch SATA Power Segment Pin Assignments
Pin#
P1
P2
P3
P4
P5
P6
P7
Key
P8
P9
Signal Name
V33
V33
GND
GND
V5
V5
Reserved
Key
Optional
Optional
Description
3.3V power
3.3V power
Ground
Ground
No connect
No connect
No connect
Key
No connect
No connect
PDF: 09005aef84559b26
c400v_1_8.pdf - Rev. F 11/13 EN
5 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.
5 Page 
C400v 1.8-Inch NAND Flash SSD
Device ID
Table 12: Identify Device (Continued)
See note 1 for setting definitions.
Word
Bit(s)
Setting
49 –
–
15–14
F
13 F
–
12
11
–
10
9
8
7–0
50 –
15
14
13–2
1
0
–
F
F
–
F
–
F
F
–
F
F
F
X
F
51 –
53 15–3
2
( )X
F
F
1F
0
54 –
X
()X
59 15
14
13
12
11–9
8
7–0
F
F
F
F
F
V
V
60 –
M(F)
Default Value Description
– Capabilities
00b Reserved for the IDENTIFY PACKET DEVICE command
1b 1 = Standby timer values as specified in this standard are
supported
– 0 = Standby timer values shall be managed by the device
0b Reserved for the IDENTIFY PACKET DEVICE command
1b 1= IORDY is supported
– 0 = IORDY may be supported
1b 1 = IORDY may be disabled
1b 1 = LBA is supported
1b 1 = DMA is supported
00000000b Retired
– Capabilities
0b Shall be cleared to zero
1b Shall be set to one
000000000000b Reserved
0b Obsolete
1b Shall be set to one to indicate a vendor specific standby tim-
er value minimum
0000h 0000h Obsolete
0000000000000b Reserved
1b 1 = Fields reported in word 88 are valid
0 = Fields reported in word 88 are not valid
1b 1 = Fields reported in words (70:64) are valid
0 = Fields reported in words (70:64) are not valid
1b Obsolete
3FFFh 0010h
003Fh FC10h
00FBh
Obsolete
0b 1 = The BLOCK ERASE EXT command is supported
0b 1 = The OVERWRITE EXT command is supported
0b 1 = The CRYPTO SCRAMBLE EXT command is supported
0b 1 = The sanitize feature set is supported
000b
Reserved
1b 1 = Multiple sector setting is valid
00000001b
xxh = Current setting for number of logical sectors that shall
be transferred per DRQ data block on READ/WRITE MULTI-
PLE commands
Varies by capacity Total number of user addressable logical sectors
PDF: 09005aef84559b26
c400v_1_8.pdf - Rev. F 11/13 EN
11
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet MTFDDAA064MAM.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MTFDDAA064MAM | C400v 1.8-Inch SATA NAND Flash SSD | Micron |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |