DataSheet.es    


PDF MTFDDAK128MAM Data sheet ( Hoja de datos )

Número de pieza MTFDDAK128MAM
Descripción C400 2.5-Inch SATA NAND Flash SSD
Fabricantes Micron 
Logotipo Micron Logotipo



Hay una vista previa y un enlace de descarga de MTFDDAK128MAM (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! MTFDDAK128MAM Hoja de datos, Descripción, Manual

C400 2.5-Inch NAND Flash SSD
Features
C400 2.5-Inch SATA NAND Flash SSD
MTFDDAC128MAM, MTFDDAC256MAM, MTFDDAC512MAM
MTFDDAK128MAM, MTFDDAK256MAM, MTFDDAK512MAM
Features
• Micron® 25nm MLC NAND Flash
• RoHS-compliant package
• SATA 6 Gb/s interface
• ATA modes supported
– PIO mode 3, 4
– Multiword DMA mode 0, 1, 2
– Ultra DMA mode 0, 1, 2, 3, 4, 5
• Industry-standard, 512-byte sector size support
• Hot-plug capable
• Native command queuing support with 32-com-
mand slot support
• ATA-8 ACS2 command set compliant
• ATA security feature command set and password
login support
• Secure erase (data page) command set: fast and se-
cure erase
• Self-monitoring, analysis, and reporting technology
(SMART) command set
• Performance1, 2
– Sequential 128k READ: up to 500 MB/s
– Sequential 128k WRITE: up to 260 MB/s
– Random 4k READ: up to 45,000 IOPS
– Random 4k WRITE: up to 50,000 IOPS
– PCMark® Vantage (HDD test suite score): up to
75,000
– READ/WRITE latency: 55µs (TYP)
• Reliability
– MTTF: 1.2 million device hours3
– Static and dynamic wear leveling
– Uncorrectable bit error rate (UBER): <1 sector
per 1015 bits read
– Low power consumption
– <280mW TYP4
• Endurance: Total bytes written (TBW) – 72TB
• Capacity5 (unformatted): 128GB, 256GB, 512GB
• Mechanical – 9.5mm height
– SATA connector: 5V ±10%
– 2.5-inch drive: 100.5mm x 69.85mm x 9.5mm
– Weight: 75g (MAX)
• Mechanical – 7.0mm height
– SATA connector: 5V ±10%
– 2.5-inch drive: 100.5mm x 69.85mm x 7.0mm
– Weight: 73g (MAX)
• Field-updateable firmware
• Operating temperature
– Commercial (0°C to +70°C)6
Notes:
1. Typical I/O performance numbers as meas-
ured using Iometer with a queue depth of
32 and write cache enabled.
2. 4K transfers used for READ/WRITE latency
values.
3. The product achieves a mean time to failure
(MTTF) based on population statistics not
relevant to individual units.
4. Active power measured during execution of
MobileMark® 2007 with DIPM (device-initi-
ated power management) enabled.
5. 1GB = 1 billion bytes; formatted capacity is
less.
6. Drive case temperature.
Warranty: Contact your Micron sales representative
for further information regarding the product,
including product warranties.
PDF: 09005aef8455a0a5
c400_2_5_128-512gb.pdf - Rev. F 07/12 EN
1 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.

1 page




MTFDDAK128MAM pdf
C400 2.5-Inch NAND Flash SSD
Interface Connectors
Interface Connectors
The SATA signal segment interface cable has four conductors and three ground connec-
tions. As shown in Package Dimensions, the cable includes a 7-pin signal segment and a
15-pin power segment arranged in a single row with a 1.27mm (0.050in) pitch.
Table 3: SATA Signal Segment Pin Assignments
Signal Name
S1
S2
S3
S4
S5
S6
S7
Type
GND
A
A#
GND
B#
B
GND
Description
Ground
Differential signal pair A and A#
Ground
Differential signal pair B and B#
Ground
Table 4: 2.5-Inch SATA Power Segment Pin Assignments
Pin#
P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
P11
P12
P13
P14
P15
Signal Name
V33
V33
V33
GND
GND
GND
V5
V5
V5
GND
DAS
GND
V12
V12
V12
Description
No connect
No connect
No connect
Ground
Ground
Ground
5V power, precharge
5V power
5V power
Ground
Device activity signal
Ground
No connect
No connect
No connect
PDF: 09005aef8455a0a5
c400_2_5_128-512gb.pdf - Rev. F 07/12 EN
5 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.

5 Page





MTFDDAK128MAM arduino
C400 2.5-Inch NAND Flash SSD
Device ID
Table 12: Identity Device (Continued)
See Note 1 for setting definitions
Word
Bit(s)
Setting
49
15–14
F
13 F
12
11
10
9
8
7–0
50
15
14
13–2
1
0
51
53 15–3
2
1
0
54
59 15
14
13
12
11–9
8
7–0
60
F
F
F
F
F
F
F
F
X
F
( )X
F
F
F
X
()X
F
F
F
F
F
V
V
M(F)
Default Value Description
Capabilities
00b Reserved for the IDENTIFY PACKET DEVICE command.
1b 1 = Standby timer values as specified in this standard are
supported
0 = Standby timer values shall be managed by the device
0b Reserved for the IDENTIFY PACKET DEVICE command.
1b 1= IORDY supported
0 = IORDY may be supported
1b 1 = IORDY may be disabled
1b 1 = LBA supported
1b 1 = DMA supported.
00000000b Retired
Capabilities
0b Shall be cleared to zero
1b Shall be set to one
000000000000b Reserved
0b Obsolete
1b Shall be set to one to indicate a vendor specific standby tim-
er value minimum.
0000h 0000h Obsolete
0000000000000b Reserved
1b 1 = the fields reported in word 88 are valid
0 = the fields reported in word 88 are not valid
1b 1 = the fields reported in words (70:64) are valid
0 = the fields reported in words (70:64) are not valid
1b Obsolete
3FFFh 0010h
003Fh FC10h
00FBh
Obsolete
0b 1 = The BLOCK ERASE EXT command is supported
0b 1 = The OVERWRITE EXT command is supported
0b 1 = The CRYPTO SCRAMBLE EXT command is supported
0b 1 = The Sanitize feature set is supported
000b
Reserved
1b 1 = Multiple sector setting is valid
00000001b
xxh = Current setting for number of logical sectors that shall
be transferred per DRQ data block on READ/WRITE MULTI-
PLE commands
Varies by capacity Total number of user addressable logical sectors
PDF: 09005aef8455a0a5
c400_2_5_128-512gb.pdf - Rev. F 07/12 EN
11
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet MTFDDAK128MAM.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
MTFDDAK128MAMC400 2.5-Inch SATA NAND Flash SSDMicron
Micron

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar