DataSheet.es    


PDF EST7502C Data sheet ( Hoja de datos )

Número de pieza EST7502C
Descripción POWER SUPPLY SUPERVISOR
Fabricantes EST 
Logotipo EST Logotipo

EST7502C image


1. PDF - POWER SUPPLY SUPERVISOR






Hay una vista previa y un enlace de descarga de EST7502C (archivo pdf) en la parte inferior de esta página.


Total 8 Páginas

No Preview Available ! EST7502C Hoja de datos, Descripción, Manual

EST7502C/EST7502CS
POWER SUPPLY SUPERVISOR WITH PWM CONTROLLER
Description
The EST7502C is designed with a pulse-width-modulation control circuit
and a complete power supervisor for use in the switched mode power
supply .
It contains various functions, like under voltage protection (UVP), over
voltage protection (OVP), power good output (PG) and ON/OFF control
(REM).
UVP(Under voltage protection) function is for +3.3V, +5V, +12V outputs.
OVP(Over voltage protection) function is for +3.3V, +5V, +12V and PT is
for extra protection input.
PG(Power good signal) is a safe operation signal to inform the external
parts.
REM(Remote on/off) is used to control the SMPS on/off. The REM control
signal has the on/off transferred debounce–time.
PIN CONFIGURATION (Top View)
FEATURE
3-channel under voltage protection (UVP)
3-channel over voltage protection (OVP)
1-channel extra protection (PT)
1-channel sense input to control the PG (SEN)
Remote on/off control function (REM)
Dual output for push-pull operation (OP1/OP2)
Soft start capability by external capacitor (SS)
VCC under voltage lockout
16-Pin dual in-line package
Pb-free Package are available
ORDERING INFORMATION
ORDER NUMBER
EST7502C
EST7502C
Package
DIP-16 (Pb-free)
SOP-16(Pb-free)
REFERENCE APPLICATION CIRCUIT
Shipping
Tube
Tube
Top Marking
EST.7502C
EST.7502C
www.esthome.com
1
2012.5.1 Rev.A1.5 datasheet

1 page




EST7502C pdf
EST7502C
POWER SUPPLY SUPERVISOR WITH PWM CONTROLLER
APPLICATION HINTS
1. Input Impedence
Pin Name
V33
V5
V12
PT
Input Impedence
58K
89K
58K
Pull-high to VCC= 33 K
Pull-low to GND= 5.4 K
2. Soft Start
3. PWM Frequency
Tpwm= K2 · RT
K2 = 1.3·10-10
Example.
RT = 100K
Tpwm = (1.33·10-10) · (100 ·103 ) = 13.3us
Fpwm = 75KHz
4.PT
PT Voltage Level
PT>1.25V
PT<0.57V
Function
Over voltage protection
Disable under voltage check function
5.REM
In some application circuits, adding a resistor in series with the REM pin could reduce the noise spike and avoid
the pin from damage.
www.esthome.com
5 2012.5.1 Rev.A1.5 datasheet

5 Page










PáginasTotal 8 Páginas
PDF Descargar[ Datasheet EST7502C.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
EST7502BPC Power Supply PWMEST
EST
EST7502CPOWER SUPPLY SUPERVISOREST
EST
EST7502CSPOWER SUPPLY SUPERVISOREST
EST

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar