AT1042 Datasheet PDF - BCD
| Part Number | AT1042 | |
| Description | General Purpose ITVS | |
| Manufacturers | BCD | |
| Logo |  |
|
|
There is a preview and AT1042 download ( pdf file ) link at the bottom of this page. Total 7 Pages | ||
Preview 1 page No Preview Available !
Preliminary Datasheet
General Purpose ITVS, 4 I/Os, CI/O-VSS<1.1pF, VCC
AT1042
General Description
BCD ITVS (Integrated Transient Voltage Suppression)
devices are designed and built using a BCD
proprietary process based on BCD standard
technology. These devices integrate the various diodes,
transistors and resistors required to build these ITVS
products. These diodes and transistors feature low
parasitic resistance and the diodes also exhibit low
capacitance. Using these devices, BCD is able to
design voltage clamping products where low
capacitance associated with low dynamic resistance is
required.
The BCD AT1042 is a general purpose, high
performance and low cost device suitable for
protecting high speed data interfaces. The AT1042 is a
unique design integrating low capacitance steering
diodes and a clamping cell, specially created to protect
sensitive components connected to data and
transmission lines.
The AT1042 is available in SOT-23-6 package. This
package allows simple and optimal placement in
existing high-speed PCB layout.
Features
• Low Clamping Voltage:
Typical 6.5V at 10A 100ns, TLP, VCC to VSS
Typical 9V at 10A 100ns, TLP, I/O to VSS
8.5V at 9A 8μs/20μs, VCC to VSS
9V at 5A 8μs/20μs, I/O to VSS
• IEC 61000-4-2: ±22kV (VCC to VSS, Air)
±22kV (VCC to VSS, Contact)
• IEC 61000-4-2: ±15kV (I/O to VSS, Air)
±15kV (I/O to VSS, Contact)
• IEC 61000-4-5: ±9A (VCC to VSS)
• IEC 61000-4-5: ±5A (I/O to VSS)
• Input Capacitance from I/O to VSS: 0.65pF
• TLP Dynamic Resistance, I/O to VSS: 0.25Ω
• Monolithic Silicon Technology
Application
• USB 2.0 Power/Data Lines Protection
• HDMI 1.3, High Definition Multi Media
• IEEE 1394
• Laptop and Personal Computers
• Flat Panel Displays
• Video Graphics Cards
• SIM Ports
Jan. 2013 Rev. 2. 2
SOT-23-6
Figure 1. Package Type of AT1042
BCD Semiconductor Manufacturing Limited
1
|
| |
 
Preliminary Datasheet
General Purpose ITVS, 4 I/Os, CI/O-VSS<1.1pF, VCC
Typical Performance Characteristics (Continued)
TA=25°C, unless otherwise specified.
AT1042
9.5
9.0
8.5
8.0
IEC 61000-4-5 (Lightning)
7.5
7.0
123456
Current from I/O to VSS (A)
Figure 6. Clamping Voltage
vs. Current from I/O to VSS (8μs/20μs)
1.0
0.8
0.6
0.4
0.2
0.0
0
f=1MHz, V =4.8V, V =0V
CC SS
1234
Input Voltage (V)
5
Figure 7. Input Capacitance vs. Input Voltage
VCLAMPING=8.9V
2V/div
Current
Waveform,
(Surge, 8x20 μs,
IPP=5.1A)
2A/div
Time 10μs/div
VCLAMPING=7.9V
2V/div
Current
Waveform,
(Surge, 8x20 μs,
IPP=8.8A)
2A/div
Time 10μs/div
Figure 8. Waveform of I/O to GND (Positive)
Figure 9. Waveform of VCC to VSS (Positive)
Jan. 2013 Rev. 2. 2
BCD Semiconductor Manufacturing Limited
5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for AT1042 electronic component. |
| Information | Total 7 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ AT1042.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| AT1042 | The function is General Purpose ITVS. BCD | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
AT10
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||