C30659-1550E-R08BH Datasheet دیتاشیت PDF دانلود

دیتاشیت - Excelitas - Si and InGaAs APD Preamplifier Modules

شماره قطعه C30659-1550E-R08BH
شرح مفصل Si and InGaAs APD Preamplifier Modules
تولید کننده Excelitas 
آرم Excelitas 

1 Page


No Preview Available !

C30659-1550E-R08BH شرح
Photon Detection
C30659 Series 900/1060/1550/1550E
Si and InGaAs APD Preamplifier Modules
Excelitas’ C30659-1550E InGasAs APD Preamplifier Modules exhibit enhanced damage threshold
and greater resilience when exposed to higher optical power densities.
Excelitas Technologies’ C30659 Series includes a Si or InGaAs Avalanche Photodiode
(APD) with a hybrid preamplifier, in the same hermetically-sealed TO-8 package, to
allow for ultra-low noise operation.
The Si APDs used in these devices are the same as used in Excelitas’ C30817EH,
C30902EH, C30954EH and C30956EH products, while the InGaAs APDs are used in
the C30645EH and C30662EH products. These detectors provide very good response
between 830 and 1550 nm and very fast rise- and fall-times at all wavelengths. The
preamplifier section of the module uses a very low noise GaAs FET front end
designed to operate at higher transimpedance than Excelitas’ regular C30950 Series.
The C30659 is pin-to-pin compatible with the C30950 Series with a negative output.
An emitter follower is used as an output buffer stage. To obtain the wideband
characteristics, the output of these devices should be capacitively- or AC-coupled to
a 50 termination. The module must not be DC-coupled to loads of less than 2,000
Ohms. For field use, it is recommended that a temperature-compensated HV supply
be employed to maintain a constant responsivity over temperature.
Excelitas’ InGaAs C30659-1550E Preamplifier Modules, with 1550 nm peak
response, are designed to exhibit higher damage thresholds, thus providing
greater resilience when exposed to high optical power densities.
Customization of the C30659 Series of APD Preamplifier Modules is available
to meet your specific design challenges; modifications include bandwidth and gain
optimization, use of different APDs, FC-connectorized packaging.
C30659 Series-Rev.1.1-2013.06 Page 1 of 10
Key Features
System bandwidths of 50 MHz
and 200MHz
Ultra low noise equivalent
power (NEP)
Spectral response range:
With Si APD: 400 to 1100 nm
With InGaAs APD: 1100 to
1700 nm
Typical power consumption: 150 mW
±5 V amplifier operating voltages
50 Ω AC load capability (AC-Coupled)
Hermetically-sealed TO-8 package
High reliability
Fast overload recovery
Pin-to-pin compatible with the
C30950 Series
Light entry angle, over 130°
Model 1550E exhibits enhanced
damage threshold
Range finding
Confocal microscopy

قانون اساسیصفحه 10
دانلود [ C30659-1550E-R08BH دیتاشیت ]

دیتاشیت توصیه

شماره قطعه شرح مفصل تولید کنندگان
C30659-1550E-R08BH Si and InGaAs APD Preamplifier Modules Excelitas


Lithium-Ion Battery


PCI Bus Bridge Memory Controller



Advanced Semiconductor
Advanced Semiconductor    |   2020   |   تماس با ما  |   جستجو