|
|
PDF WCS2702 Data sheet ( Hoja de datos )
| Número de pieza | WCS2702 | |
| Descripción | Hall Effect Base Linear Current Sensor | |
| Fabricantes | Winson | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de WCS2702 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
WCS2702
Hall Effect Base Linear Current Sensor
Features:
Low noise analog signal path
98 mΩ internal conductor resistance
Output voltage proportional to AC and DC current
Min. sensing current 0~2.0A at 5V voltage supply
High Sensitivity 1 mV/mA
Wide operating voltage range 3.0~12 V.
Low operating current 3mA
Nearly zero magnetic hysteresis.
Ratiometric output from supply voltage
10K Hz bandwidth
Functional Description :
The Winson WCS2702 provides economical and precise solution for both
DC and AC current sensing in industrial, commercial and communications
systems. The unique package allows for easy implementation by the customer.
Typical applications include motor control, load detection and management,
over-current fault detection and any intelligent power management system
etc…
The WCS2702 consists of a precise, low-temperature drift linear hall
sensor IC with temperature compensation circuit and a current path with 98
mΩ typical internal conductor resistance. This extremely low resistance can
effectively reduce power loss, operating temperature and increase the
reliability greatly. Applied current flowing through this conduction path
generates a magnetic field which is sensed by the integrated Hall IC and
converted into a proportional voltage.
The terminals of the conductive path are electrically isolated from the
sensor leads. This allow the WCS2702 current sensor to be used in
applications requiring electrical isolation without the use of opto-isolators or
other costly isolation techniques and make system more competitive in cost.
Winson reserves the right to make changes to improve reliability or manufacturability.
©Winson, 2015/5/27
1 page  
Package Information:
WCS2702
Winson reserves the right to make changes to improve reliability or manufacturability.
©Winson, 2015/5/27
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet WCS2702.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| WCS2702 | Hall Effect Base Linear Current Sensor | Winson |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |