DataSheetWiki


OPB685-3 fiches techniques PDF

OPTEK - Optical Flag Switch

Numéro de référence OPB685-3
Description Optical Flag Switch
Fabricant OPTEK 
Logo OPTEK 





1 Page

No Preview Available !





OPB685-3 fiche technique
Photologic® Optical Flag Switch
OPB685, OPB685-3, OPB686, OPB687, OPB688
OPB695, OPB696, OPB697, OPB698 Series
Features:
 Photologic® output
 Four output options
 Mechanical switch replacement
 Printed circuit board mounting (OPB685 Series)
 2.5mm, 3-pin connector mates with Molex connector 5051 series
housing and 4809 series terminal for OPB695 Series
OPB685
Product Photo Here
OPB695
Description:
Each OPB685 and OPB695 series flag switch consists of an infrared emitting diode and a monolithic integrated
circuit that incorporates a photodiode, a linear amplifier and a Schmitt trigger. A lever arm actuated flag interrupts
the light beam, which switches the output between states that can readily drive logic gates.
The OPB695 series is designed to easily snap mount into a 0.037” ± 0.001” (0.940 mm ± 0.025 mm) thick material
with a rectangular opening of 0.320” ± 0.003” x 0.472” (8.13 mm x 11.99 mm) minimum. Insertion into the
punched side of metal is recommended.
Devices in these series feature TTL/LSTTL compatible logic level output that can drive up to 10 TTL loads over a
voltage range from 4.5 V to 16 V.
Customized lever arms and spring torques can be designed for specific applications for each of the devices.
Custom electrical, wire, cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
Mechanical switch replacement
Speed indication (tachometer)
Mechanical limit indication
Edge sensing
Part LED Peak
Number Wavelength
OPB685
OPB686
OPB687
OPB688
OPB695AZ
OPB695BZ
OPB695CZ
OPB696AZ
OPB696BZ
890 nm
OPB696CZ
OPB697AZ
OPB697BZ
OPB697CZ
OPB698AZ
OPB698BZ
OPB698CZ
Ordering Information
Sensor Photologic®
Flag Travel
Degrees Max
10K Pull-Up
Open Collector
Inv. 10K Pull-Up
59°
Inv. Open Collector
10K Pull-Up
Open Collector
Inv. 10K Pull-Up
70°
Inv. Open Collector
Lead Length /
Spacing or Connector
0.100" / 0.275"
Mates with
3 Pin—Molex
5051 (22-01-1032)
Housing
& 4809 (08-70-0069)
Terminals
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.3 03/15
Page 1 of 5

PagesPages 5
Télécharger [ OPB685-3 ]


Fiche technique recommandé

No Description détaillée Fabricant
OPB685-3 Optical Flag Switch OPTEK
OPTEK

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche