|
|
Numéro de référence | R5F51105AGFL | ||
Description | 32 MHz 32-bit RX MCUs | ||
Fabricant | Renesas | ||
Logo | |||
1 Page
Datasheet
RX110 Group
Renesas MCUs
R01DS0202EJ0110
Rev.1.10
Dec 10, 2014
32 MHz 32-bit RX MCUs, 50 DMIPS,
up to 128 Kbytes of flash memory, up to 5 comms channels, 12-bit A/D, RTC
Features
■ 32-bit RX CPU core
32 MHz maximum operating frequency
Capable of 50 DMIPS when operating at 32 MHz
Accumulator handles 64-bit results (for a single
instruction) from 32-bit × 32-bit operations
Multiplication and division unit handles 32-bit × 32-bit
operations (multiplication instructions take one CPU
clock cycle)
Fast interrupt
CISC Harvard architecture with five-stage pipeline
Variable-length instruction format, ultra-compact code
On-chip debugging circuit
■ Low power consumption functions
Operation from a single 1.8 to 3.6 V supply
Three low power modes
Supply current
High-speed operating mode: 0.1 mA/MHz
Software standby mode: 0.35 μA
Recovery time from software standby mode: 4.8 μs
■ On-chip flash memory for code, no wait states
Operation at 32 MHz, read cycle of 31.25 ns
No wait states for reading at full CPU speed
8 to 128 Kbyte capacities
Programmable at 1.8 V
For instructions and operands
■ On-chip SRAM, no wait states
8 to 16 Kbyte capacities
■ Data transfer controller (DTC)
Four transfer modes
Transfer can be set for each interrupt source.
■ Reset and power supply voltage management
Six types including the power-on reset (POR)
Low voltage detection (LVD) with voltage settings
■ Clock functions
External clock input frequency: Up to 20 MHz
Main clock oscillator frequency: 1 to 20 MHz
Sub-clock oscillator frequency: 32.768 kHz
Low-speed on-chip oscillator: 4 MHz
High-speed on-chip oscillator: 32 MHz±1% (20 to 85°C)
IWDT-dedicated on-chip oscillator: 15 kHz
Generate a dedicated 32.768-kHz clock for the RTC
On-chip clock frequency accuracy measurement circuit
(CAC)
■ Real-time clock (RTC)
30-second, leap year, and error adjustment functions
Calendar count mode or binary count mode selectable
Capable initiating exit from software standby mode
R01DS0202EJ0110 Rev.1.10
Dec 10, 2014
PLQP0064KB-A 10 × 10 mm, 0.5 mm pitch
PLQP0064GA-A 14 × 14 mm, 0.8 mm pitch
PLQP0048KB-A 7 × 7 mm, 0.5 mm pitch
PWQN0048KB-A 7 × 7 mm, 0.5 mm pitch
PWQN0040KC-A 6 × 6 mm, 0.5 mm pitch
PWLG0064KA-A 5 × 5 mm, 0.5 mm pitch
PWLG0036KA-A 4 × 4 mm, 0.5 mm pitch
■ Independent watchdog timer (WDT)
15-kHz on-chip oscillator produces a dedicated clock
signal to drive IWDT operation.
■ On-chip functions for IEC 60730 compliance
Clock frequency accuracy measurement circuit, IWDT,
functions to assist in RAM testing, etc.
■ Up to five channels for communication
SCI: Asynchronous mode, clock synchronous mode,
smart card interface (up to seven channels)
I2C bus interface: Transfer at up to 400 kbps, capable of
SMBus operation (one channel)
RSPI: Up to 16 Mbps (one channel)
■ Up to 6 extended-function timers
16-bit MTU: Input capture/output compare,
phase counting mode (four channels)
16-bit CMT (two channels)
■ 12-bit A/D converter
Up to 14 channels
1.0 μs minimum conversion speed
Double trigger (data duplication) function for motor
control
■ Temperature sensor
■ General I/O ports
5-V tolerant, open drain, input pull-up
■ Multi-function pin controller (MPC)
Multiple I/O pins can be selected for peripheral functions.
■ Unique ID
32-byte ID code for the MCU
■ Operating temperature range
40 to 85C
40 to 105°C
Page 1 of 103
|
|||
Pages | Pages 30 | ||
Télécharger | [ R5F51105AGFL ] |
No | Description détaillée | Fabricant |
R5F51105AGFK | 32 MHz 32-bit RX MCUs | Renesas |
R5F51105AGFL | 32 MHz 32-bit RX MCUs | Renesas |
R5F51105AGFM | 32 MHz 32-bit RX MCUs | Renesas |
US18650VTC5A | Lithium-Ion Battery | Sony |
TSPC106 | PCI Bus Bridge Memory Controller | ATMEL |
TP9380 | NPN SILICON RF POWER TRANSISTOR | Advanced Semiconductor |
www.DataSheetWiki.com | 2020 | Contactez-nous | Recherche |