APXE6R3ARA152MJA0G Datasheet PDF - NIPPON CHEMI-CON
| Part Number | APXE6R3ARA152MJA0G | |
| Description | CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS | |
| Manufacturers | NIPPON CHEMI-CON | |
| Logo |  |
|
|
There is a preview and APXE6R3ARA152MJA0G download ( pdf file ) link at the bottom of this page. Total 2 Pages | ||
Preview 1 page No Preview Available !
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
Surface Mount
PXENPCAPTM-
Series
・Super low ESR, impedance and high heat resistance have been obtained by using
conductive polymer as electrolyte.
(ESR and rated ripple current values are improved from PXA series.)
・Rated voltage range : 2.5 to 16Vdc, Capacitance range : 33 to 2,700µF
・Suitable for DC-DC converters, voltage regulators and decoupling applications used on
computer motherboards etc.
・Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
・RoHS Compliant
・Halogen Free
◆SPECIFICATIONS
PXF P34
Lower ESR
PXE
Lower ESR
PXA P38
Items
Characteristics
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Surge Voltage
Leakage Current
Dissipation Factor
(tan )
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
-55 to +105℃
2.5 to 16Vdc
±20% (M)
Rated voltage×1.15
Shall not exceed values shown in STANDARD RATINGS.
(at 20℃, 120Hz)
(at 105℃)
(at 20℃ after 2 minutes)
0.12 max.
(at 20℃, 120Hz)
Z(-25℃)/Z(+20℃)≦1.15
Z(-55℃)/Z(+20℃)≦1.25
(at 100kHz)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 hours
at 105℃.
Appearance
No significant damage
Capacitance change
≦±20% of the initial value
D.F. (tanδ)
≦150% of the initial specified value
ESR
≦150% of the initial specified value
Bias Humidity
Leakage current
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at
60℃, 90 to 95% RH for 1,000 hours.
Appearance
No significant damage
Capacitance change
≦±20% of the initial value
D.F. (tanδ)
≦150% of the initial specified value
ESR
≦150% of the initial specified value
Surge Voltage
Leakage current
≦The initial specified value
The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds
through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds.
Appearance
No significant damage
Capacitance change
≦±20% of the initial value
D.F. (tanδ)
≦150% of the initial specified value
ESR
≦150% of the initial specified value
Failure Rate
Leakage current
≦The initial specified value
0.5% per 1,000 hours maximum (Confidence level 60% at 105℃)
*Note : If any doubt arises, measure the leakage current after the following voltage treatment.
Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃.
◆DIMENSIONS [mm]
◆MARKING
●Terminal Code : A
W
0.3max.
L±0.3 (Note)
A±0.2
(Note) L±0.5 for HA0, HC0, JA0, JC0
Size Code φD L A B C
W
E61 5 5.8 5.3 5.3 5.9 0.5 to 0.8
F61 6.3 5.8 6.6 6.6 7.2 0.5 to 0.8
F80 6.3 7.7 6.6 6.6 7.2 0.5 to 0.8
H70 8 6.7 8.3 8.3 9.0 0.7 to 1.1
H80 8 7.7 8.3 8.3 9.0 0.7 to 1.1
HA0 8 10.0 8.3 8.3 9.0 0.7 to 1.1
HC0 8 12.0 8.3 8.3 9.0 0.7 to 1.1
J80 10 7.7 10.3 10.3 11.0 0.7 to 1.1
JA0 10 10.0 10.3 10.3 11.0 0.7 to 1.1
JC0 10 12.2 10.3 10.3 11.0 0.7 to 1.1
P
1.4
1.9
1.9
3.1
3.1
3.1
3.1
4.5
4.5
4.5
EX) 2.5V390µF
E49A
390
2.5V
◆PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
A PXE A RA M G
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 47µF:470,100µF:101)
Taping code
Terminal code
Voltage code (ex. 6.3V:6R3,10V:100)
Series code
Category Please refer to "Product code guide (conductive polymer type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
36 CAT. No. E1001O
|
| |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for APXE6R3ARA152MJA0G electronic component. |
| Information | Total 2 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ APXE6R3ARA152MJA0G.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| APXE6R3ARA152MJA0G | The function is CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS. NIPPON CHEMI-CON | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
APXE
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||