|
|
Número de pieza | G5562A | |
Descripción | Bias Power Supply | |
Fabricantes | Global Mixed-mode Technology | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de G5562A (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! Global Mixed-mode Technology
G5562A
Bias Power Supply with High-Speed Amplifier and
High-Accuracy LDO for LCD TVs
Features
8V to 14V Input Voltage Range
500kHz/750kHz Fixed Switching Frequency
VS Step-Up Converter
Current Mode
1% Feedback Accuracy
Output Voltage Range up to 20V
3A Switch Current
Adjustable Soft Start
Adjustable Current Limit
VLOGIC Step-Down Converter
Current Mode
1% Feedback Accuracy
2.5A Switch Current
2.5ms Internal Soft Start
150mA Negative Charge Pump Driver for VGL
150mA Positive Charge Pump Driver for VGH
Integrated High Voltage Switch for Gate Volt-
age Shaping
High Voltage LDO for VREF
0.5% Feedback Accuracy
0.5V Dropout at 60mA Output Current
High-Speed Operational Amplifier
20MHz -3dB Bandwidth
45 V/µs Slew Rate
±200-mA Short-Circuit Current
Gate Drive Signal to Drive External MOSFET
XAO Comparator
Thermal Shutdown
Available in 7mmx7mm 48-pin TQFN Package
Applications
LCD TV Panels
Ordering Information
ORDER
NUMBER
G5562AR11U
Note: R1: TQFN7X7-48
1: Bonding Code
U: Tape & Reel
MARKING
5562A
General Description
The G5562A DC-DC converter provides regulated volt-
ages required by thin-film transistor (TFT) liquid crystal
displays (LCD) panels in TQFN package. One step-up
converter, one step-down converter, and two charge
pumps convert the 8V to 14V input voltage into four
output voltages. These features complete the power-
supply requirements of large screen LCD panels. The
step-up converter provides source voltages VS and the
step-down converter provides logic voltage for the sys-
tem. The dual charge pumps independently generate
adjustable regulated output voltages VGL and VGH to
bias the LCD. These four blocks operate with a fixed
switching frequency of 500kHz or 750kHz.
Both step-up and step-down converters operate in
asynchronous switch mode. Current mode control pro-
vides fast transient response and eases loop stabiliza-
tion. Fault protection includes cycle-by-cycle current
limit, thermal shutdown, and output-fault shutdown.
Current mode control is used for both charge pumps to
regulate its output voltage, which minimizes output
ripple and capacitor sizes. High voltage switch is used
for gate voltage shaping to improve TFT-LCD display
quality.
The G5562A includes one high-speed high-current
operational amplifier and one high-accuracy LDO for
Gamma buffer reference.
The G5562A is available in a 48-pin TQFN package.
TEMP.
RANGE
-40°C~ +85°C
PACKAGE
(Green)
TQFN7X7-48
Ver: 0.4
Dec 20, 2011
TEL: 886-3-5788833
http://www.gmt.com.tw
1
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet G5562A.PDF ] |
Número de pieza | Descripción | Fabricantes |
G5562 | Bias Power Supply | Global Mixed-mode Technology |
G5562A | Bias Power Supply | Global Mixed-mode Technology |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |