DataSheetWiki


LV8907UW fiches techniques PDF

ON Semiconductor - Sensor-less Three-phase Brushless DC Motor Controller

Numéro de référence LV8907UW
Description Sensor-less Three-phase Brushless DC Motor Controller
Fabricant ON Semiconductor 
Logo ON Semiconductor 





1 Page

No Preview Available !





LV8907UW fiche technique
LV8907UW
Advance Information
Sensor-less Three-phase
Brushless DC Motor Controller,
with Gate Drivers, for Automotive
Overview
The LV8907 is a high performance, AEC-Q100 qualified, sensor-less
three-phase BLDC motor controller with integrated gate drivers for driving
external N-MOSFETs. An on-chip two-stage charge pump provides required
gate current for a wide range of ultra low RDS(ON) type external N-MOSFETs.
The device offers a rich set of system protection and diagnostic functions such
as over-current, over-voltage, short-circuit, under-voltage, over-temperature
and many more. It supports open-loop as well as closed-loop speed control
with user configurable startup, speed setting and proportional/integral (PI)
control coefficients, making it suitable for a wide range of motor and load
combinations. With an in-built linear regulator for powering an external circuit,
a watchdog timer and a Local Interconnect Network (LIN) transceiver, the
LV8907 offers the smallest system solution footprint.
The LV8907 stores system paramerters in embedded one-time programmable
(OTP) non-volatile memory and operates out of system memory. An SPI
interface is provided for parameter setting and monitoring the system health.
With the operating junction temperature tolerance up to 175ºC and electrically
LIN compatible control signals (PWM and Enable), the LV8907 is an ideal
solution stand-alone automotive BLDC motor control systems.
Features
AEC-Q100 qualified and PPAP capable.
Operating junction temperature up to 175ºC
Operating voltage range from 5.5V to 20V with tolerance from 4.5V to
40V
Embedded proprietary sensor-less commutation control
Integrated gate drivers for driving six N-MOSFETs
Two-stage charge pump for continuous 100% duty-cycle operation
On-chip OTP memory for storing system parameters
In-built LIN transciever and Watchdog timer
SPI interface for real-time parameterization and diagnostic
Integrated 5V/3.3V regulator output for external circuit
Supports open-loop as well as closed-loop speed control
Configurable speed setting and PI control coefficients
Various system protection features including:
o Shoot through protection using configurable dead-time
o Drain-source short detection
o Cycle-by-cycle current limit and over-current shutdown
o Over-voltage and under-voltage shutdown
o Over-temperature warning and shutdown
o Input PWM fault detection
Typical Applications
Automotive pumps (Fuel, Oil, and Hydraulic)
Fans (HVAC, Radiator, Battery Cooling, LED Headlight Cooling)
BLDC motor control with or without LIN control
White goods and industial BLDC motor control
This document contains information on a new product. Specifications and information
herein are subject to change without notice.
© Semiconductor Components Industries, LLC, 2015
July 2015- Rev. P2
1
www.onsemi.com
PACKAGE PICTURE
SPQFP48 7x7 / SQFP48K
7 mm x 7 mm SQFP48K
Publication Order Number:
LV8907UW/D

PagesPages 30
Télécharger [ LV8907UW ]


Fiche technique recommandé

No Description détaillée Fabricant
LV8907UW Sensor-less Three-phase Brushless DC Motor Controller ON Semiconductor
ON Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche