|
|
PDF EMI9106 Data sheet ( Hoja de datos )
| Número de pieza | EMI9106 | |
| Descripción | EMI Filter | |
| Fabricantes | ON Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de EMI9106 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
EMI9106
EMI Filter for MicroSD
Interfaces
Description
The EMI9106 is a combination EMI filter and line termination
device with integrated TVS diodes for use on Multimedia Card
interfaces. This state−of−the−art device utilizes solid−state, silicon−
avalanche technology for superior clamping performance and DC
electrical characteristics. The EMI9106 has been optimized for
protection of MicroSD interfaces in cellular phones and other portable
electronics.
The EMI9106 consists of six circuits that includes series impedance
matching resistors as required by the SD specification. TVS diodes are
included on each line for ESD protection. An additional TVS diode
connection is included for protection of the voltage (Vcc) bus.
Termination resistor value of 40 W is provided on the SDData0,
SDData1, SDData2, SDData3, CMD, and CLK lines.
The TVS diodes provide effective suppression of ESD voltages in
excess of ±15 kV (contact discharge) per IEC 61000−4−2, level 4. The
EMI9106 is in a 16−pin, RoHS/WEEE compliant, UDFN 16−pin
package. It measures 3.30 x 1.35 x 0.50 mm. The leads are spaced at a
pitch of 0.4 mm and are finished with lead−free NiPd.
Features
• Bidirectional EMI/RFI Filtering and Line Termination with
Integrated ESD Protection
• Provides ESD Protection to IEC61000−4−2:
±15 kV Contact Discharge
• TVS Working Voltage: 3.3 V
• Termination Resistors: 40 W
• Typical Capacitance per Line: 12 pF (VIN = 2.5 V)
• Protection and Termination for Six Lines + Vcc
• Solid−state Technology
Applications
• MicroSD Interfaces
• MMC Interfaces
• CDMA, GSM, 3G Cell Phones
Mechanical Characteristics
• 0.40 mm, uDFN 16−pin Package
• Nominal Dimensions: 3.30 x 1.35 x 0.50 mm
• Pitch: 0.4 mm
• Pin−lead Finish: NiPd
• RoHS/WEEE Compliance, Lead−free Finish
http://onsemi.com
16
1
UDFN16
CASE 517BE
MARKING DIAGRAM
9106 MG
G
1
9106 = Specific Device Code
M = Single Character Date Code
G = Pb−Free Package
(*Note: Microdot may be in either location)
PINOUT DIAGRAM
SDData1
SDData0
SDCLK
ESD1
ESD3
SDCMD
SDData3
SDData2
Data1
Data0
CLK
ESD1
VCC
CMD
Data3
Data2
(Top View)
ORDERING INFORMATION
Device
Package
Shipping†
EMI9106MUTAG UDFN16 3000/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2013
December, 2013 − Rev. 0
1
Publication Order Number:
EMI9106/D
1 page  
EMI9106
PACKAGE DIMENSIONS
2X
0.10 C
D
PIN ONE
REFERENCE
ÉÉÉ2X
ÉÉÉ0.10 C
TOP VIEW
0.05 C
16X
0.05 C
NOTE 4
DETAIL B
SIDE VIEW
16X L
1
D2
UDFN16, 3.3x1.35, 0.4P
CASE 517BE
ISSUE O
A
B
L
L
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
L1
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED TERMINAL
E
DETAIL A
OPTIONAL
CONSTRUCTIONS
AND IS MEASURED BETWEEN 0.15 AND
0.25 mm FROM THE TERMINAL TIP.
4. COPLANARITY APPLIES TO THE EXPOSED
PAD AS WELL AS THE TERMINALS.
A
(A3)
ÇÇÉÇÇÉEXPOSED Cu
MOLD CMPD
A3
A1
C
SEATING
PLANE
A1 DETAIL B
OPTIONAL
CONSTRUCTION
MILLIMETERS
DIM MIN MAX
A 0.45 0.55
A1 0.00 0.05
A3 0.13 REF
b 0.15 0.25
D 3.30 BSC
D2 2.70 2.90
E 1.35 BSC
E2 0.30 0.50
e 0.40 BSC
K 0.15 −−−
L 0.20 0.30
L1 −−− 0.05
DETAIL A
8 E2
RECOMMENDED
SOLDERING FOOTPRINT*
K 16
e
9 16X b
0.10 C A B
BOTTOM VIEW
0.05 C NOTE 3
PACKAGE
OUTLINE
3.00
16X
0.40
1.55
0.50
0.40
PITCH
16X
0.25
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
5
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
EMI9106/D
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet EMI9106.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| EMI9106 | EMI Filter | ON Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |