DataSheetWiki


GBJL25MA fiches techniques PDF

GOOD-ARK - Glass Passivated Single-Phase Bridge Rectifier

Numéro de référence GBJL25MA
Description Glass Passivated Single-Phase Bridge Rectifier
Fabricant GOOD-ARK 
Logo GOOD-ARK 





1 Page

No Preview Available !





GBJL25MA fiche technique
Features
Thin Single In-Line package;
Ideal for printed circuit boards;
Glass Passivated chip junction;
Low profile package;
High Surge current capability;
High case dielectric strength of 2500 VRMS;
Plastic package has Underwrites Laboratory
Flammability Classification 94V-0;
Same footprint V.S GBJ package;
Mechanical Data
Case: GBJL;
Epoxy meets UL-94V-0 Flammability rating;
Terminals:Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102;
E3 suffix for customer grade, meet JESD 201;
High temperature soldering guaranteed:
Solder Dip 270,10seconds;
Polarity: As marked on body;
Mounting Torgue: 10cm-kg (8.8inches-lbs) max;
Recommend Torgue:Mounting Torgue:
5.7cm-kg (5inches-lbs);
GBJL25JA THRU GBJL25MA
Glass Passivated Single-Phase Bridge Rectifier
Reverse Voltage - 600V to 1000V
Forward Current - 25.0 Amperes
-
~
~
+
Typical Applications
General purpose use in AC-to-DC bridge full wave rectification for
Switching Power Supply, Home Appliances, Office Equipment,
Industrial Automation applications.
Package Dimensions in mm
Maximum Ratings and Electrical Characteristics
Ratings at 25ambient temperature unless otherwise specified.
Parameter
Symbol GBJL25JA GBJL25KA GBJL25MA Unit
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward
rectified output current at
TC=110
TA=25
Peak forward surge current 8.3 ms single sine-wave
superimposed on rated load (JEDEC Method)
Rating for fusing (t<8.3ms)
Maximum Instantaneous forward voltage drop per leg at 12.5A
Maximum DC Reverse Current at Rated
DC Blocking Voltage per leg
TA=25
TA=125
Typical thermal resistance per leg
Operating junction and Storage Temperature Range
VRRM
VRMS
VDC
IF(AV)
IFSM
I2t
VF
IR
RӨJA
RӨJC
TJ,TSTG
600 800 1000
420 560 700
600 800 1000
25 (1)
3.5 (2)
280
325
1.05
5
150
22 (2)
2.5 (1)
-55 to +150
V
V
V
Amps
Amps
A2sec
Volt
μA
/W
Notes:
1). Unit case mounted on Al plate heatsink;
2). Units mounted on PCB without heatsink;
3). Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw.

PagesPages 2
Télécharger [ GBJL25MA ]


Fiche technique recommandé

No Description détaillée Fabricant
GBJL25MA Glass Passivated Single-Phase Bridge Rectifier GOOD-ARK
GOOD-ARK

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche