|
|
Número de pieza | IK6208 | |
Descripción | LED Driver IC | |
Fabricantes | IK Semicon | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de IK6208 (archivo pdf) en la parte inferior de esta página. Total 19 Páginas | ||
No Preview Available ! TECHNICAL DATA
LED Driver IC
Description
IK6208
The IK6028 are anode-grid LED display drives 5.0V~18.0V with output size
– 8 digits x 9 segments and addition key scan function.
Serial interface(UART) provides connection with microprocessor.
PWM for Buzzer driving.
Features
• Operation voltage for digital part: 3.0V ~ 3.6V
• Operation voltage for output LEDs: 5.0V ~ 18.0V
• 7-step individual dimming control for each grid
• OSC: built in (with external resistor) 500kHz @ R=12.1kΩ
• Pulse segment current: 27mA-39mA @ 8 digits x 9 segments
• Key scanning: 7x2 matrix
• Serial Interface(UART). Up to 57,600bps
• 2 Channel PWM
• Operation Temperature : -40 ~ 85°C
LQFP-32
Application
• Home Appliance : Washing machine, Refregerator, Bidet, Air Conditioner
ORDERING INFORMATION
Device
IK6208LQ
Operating
Temperature Range
TA = -40 to 85 C
Package
LQFP-32
April 2012 Ver. 01
1
1 page IK6208A
COMMAND 2: DATA SETTING COMMANDS
The Data Setting Commands executes the Data Write Mode for IK6208. The Data Setting Command,
the bits5 and 6 (b4, b5) are given the value of “0”. , bit7 (b6) is given the value of “1” while bit8 (b7) is
given the value of “0”. Please refer to the diagram below.
When power is turned ON, bit 4 to bit 1 (b3 to b0) are given the value of “0”.
Read Data from Command Register:
1st byte
2nd byte
DOUT b0 b1 b2 b3 b4 b5 b6 b7 b0 b1 b2 b3 b4 b5 b6 b7
b0-b3 of command1 b0-b3 of command2
b0-b5 of command3
don’t care
COMMAND 3: ADDRESS SETTING COMMANDS
Address Setting Commands are used to set the address of the display memory. The address is
considered valid if it has a value of “00H” to 2FH”. If the address is set to 30H or higher, the data is
ignored until a valid address is set. When power is turned ON, the address is set at “00H”.
Please refer to the diagram below.
April 2012 Ver. 01
5
5 Page IK6208A
APPLICATIONS
Display memory is updated by incrementing addresses. Please refer to the following diagram.
Where: Command 1: Display Mode Setting
Command 2: Data Setting Command
Command 3: Address Setting Command
Data 1 to n : Transfer Display Data (48 Bytes max.)
The following diagram shows the waveforms when updating specific addresses.
Where: Command 2 -- Data Setting Command
Command 3 -- Address Setting Command
Data -- Display Data
April 2012 Ver. 01
11
11 Page |
Páginas | Total 19 Páginas | |
PDF Descargar | [ Datasheet IK6208.PDF ] |
Número de pieza | Descripción | Fabricantes |
IK6207TQ-ER | UI Platform | IK Semicon |
IK6208 | LED Driver IC | IK Semicon |
IK62083 | 8CH Darlington Sink Driver | IK Semicon |
IK62084 | 8CH Darlington Sink Driver | IK Semicon |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |