DataSheetWiki


IDT8T39S10I fiches techniques PDF

Integrated Device Technology - Crystal or Differential to Differential Clock Fanout Buffer

Numéro de référence IDT8T39S10I
Description Crystal or Differential to Differential Clock Fanout Buffer
Fabricant Integrated Device Technology 
Logo Integrated Device Technology 





1 Page

No Preview Available !





IDT8T39S10I fiche technique
Crystal or Differential to Differential
Clock Fanout Buffer
IDT8T39S10I
DATASHEET
General Description
The IDT8T39S10I is a high-performance clock fanout buffer. The
input clock can be selected from two differential inputs or one crystal
input. The internal oscillator circuit is automatically disabled if the
crystal input is not selected. The crystal pin can be driven by
single-ended clock when crystal is bypassed.The selected signal is
distributed to ten differential outputs which can be configured as
LVPECL, LVDS or HSCL outputs. In addition, an LVCMOS output is
provided. All outputs can be disabled into a high-impedance state.
The device is designed for signal fanout of high-frequency, low
phase-noise clock and data signal. The outputs are at a defined level
when inputs are open circuit or tied to ground. It is designed to
operate from a 3.3V or 2.5V core power supply, and either a 3.3V or
2.5V output operating supply.
Features
Two differential reference clock input pairs
Differential input pairs can accept the following differential input
levels: LVPECL, LVDS, HCSL
Crystal Oscillator Interface
Crystal input frequency range: 10MHz to 40MHz
Maximum Output Frequency
LVPECL - 2GHz
LVDS - 2GHz
HCSL - 250MHz
LVCMOS - 250MHz
Two banks, each has five differential output pairs that can be
configured as LVPECL or LVDS or HCSL
One single-ended reference output with synchronous enable to
avoid clock glitch
Output skew: (Bank A and Bank B at the same output level)
70ps (max)
Part-to-part skew: 250ps (max)
Additive RMS phase jitter: 0.153ps (typical)
Supply voltage modes:
VDD/VDDO
3.3V/3.3V
3.3V/2.5V
2.5V/2.5V
-40°C to 85°C ambient operating temperature
Lead-free (RoHS 6) packaging
IDT8T39S10NLGI REVISION A MARCH 18. 2014
1
©2014 Integrated Device Technology, Inc.

PagesPages 30
Télécharger [ IDT8T39S10I ]


Fiche technique recommandé

No Description détaillée Fabricant
IDT8T39S10I Crystal or Differential to Differential Clock Fanout Buffer Integrated Device Technology
Integrated Device Technology

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche