DataSheetWiki


GS6150 fiches techniques PDF

Semtech - Multi-Rate 6G UHD-SDI Reclocker

Numéro de référence GS6150
Description Multi-Rate 6G UHD-SDI Reclocker
Fabricant Semtech 
Logo Semtech 





1 Page

No Preview Available !





GS6150 fiche technique
Gennum Products
GS6150
GS6150 Multi-Rate 6G UHD-SDI
Reclocker
Key Features
SMPTE ST 2081, ST 424, ST 292, and
ST 259-C compliant
Supports retiming data at rates of 125Mb/s, 270Mb/s,
1.485 and 1.485/1.001Gb/s, 2.97 and 2.97/1.001Gb/s,
5.94 and 5.94/1.001Gb/s
Supports retiming of DVB-ASI signals
Automatic or Manual Rate Selection
Š Detected rate indication in Auto Mode
4:1 input selector patented technology
Option of two reclocked data outputs
Four configurable GPIO pins with ability to output
device status, including:
Š Lock Detect
Š Loss of Signal (LOS)
Š Low/High bit-rate indication for slew-rate control of
SDI cable drivers
On-chip 100Ω differential input and output
termination
Bypass support for rates up to 5940Mb/s
Š Manual Bypass function
Š Configurable automatic Bypass when not locked
Option to use external reference or operate
referenceless
Cascading reference buffer supports multiple
reclockers using a single reference source
Input signal equalization and output signal
de-emphasis to compensate for trace dielectric losses
Single power supply operation at 1.8V
130mW typical power consumption (150mW with
second output enabled)
Pb-free and RoHS compliant
Operating temperature range: -40°C to 85°C
Applications
SMPTE ST 2081, SMPTE ST 424,
SMPTE ST 292, SMPTE ST 259-C coaxial cable serial
digital interfaces
EN50083-9 DVB-ASI interfaces
MADI standard
Description
The GS6150 is a low-power, multi-rate serial digital
reclocker designed to automatically recover the embedded
clock from a digital video signal and re-time the incoming
video data.
The GS6150 will recover the embedded clock signal and re-
time the data from 6G UHD-SDI signals compliant with
SMPTE ST 2081. In addition, it can also re-time SMPTE ST
259-C, SMPTE ST 292, SMPTE ST 424 or DVB-ASI compliant
digital video signals as well as MADI audio streams.
The GS6150 features four high-speed differential signal
inputs feeding a 4:1 input selector. Input termination is on-
chip for seamless matching to 100Ω differential
transmission lines. The input selector is a component of a
video switching system with tightly constrained timing
requirements.
The GS6150 includes programmable trace equalization to
compensate for high-frequency losses associated with
board-level interconnect.
Two CML outputs interface seamlessly to devices with a
CML input reference between 1.2V and 2.5V.
Programmable output swing and de-emphasis provide
flexibility in managing signal integrity of the output signals.
The GS6150 can operate in either automatic rate detection
or manual rate selection mode. In auto mode the device
will automatically detect and lock onto incoming data
signals at any supported rate.
GS6150
Final Data Sheet
PDS-060127
Rev.2
March 2015
www.semtech.com
1 of 64
Proprietary & Confidential

PagesPages 30
Télécharger [ GS6150 ]


Fiche technique recommandé

No Description détaillée Fabricant
GS6150 Multi-Rate 6G UHD-SDI Reclocker Semtech
Semtech

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche