|
|
PDF SUF30G Data sheet ( Hoja de datos )
| Número de pieza | SUF30G | |
| Descripción | ULTRAFAST EFFICIENT PLASTIC RECTIFIER | |
| Fabricantes | Shunye | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SUF30G (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
SUF30G AND SUF30J
ULTRAFAST EFFICIENT PLASTIC RECTIFIER
Reverse Voltage - 400 and 600 Volts Forward Current - 3.0 Amperes
Case Style P600
0.360 (9.1)
0.340 (8.6)
1.0 (25.4)
MIN.
0.360 (9.1)
0.340 (8.6)
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ Glass passivated chip junction
♦ Utrafast recovery times for high
efficiency
♦ High forward surge current capability
♦ Low leakage current
♦ Low power loss
♦ High temperature soldering guaranteed:
260°C/10 seconds at 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
0.052 (1.32)
0.048 (1.22)
DIA.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
MECHANICAL DATA
Case: Molded epoxy body over passivated chip
Terminals: Plated axial leads solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.07 ounces, 2.1 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Ratings at 25 C ambient temperature unless otherwise specified.
SYMBOLS
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
Maximum repetitive peak reverse voltage
VRRM
Maximum RMS voltage
VRMS
Maximum DC blocking voltage
VDC
Maximum average forward rectified current,
0.200” (5.0mm) lead length at TA=60°C
I(AV)
Peak forward surge current, 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method) at TA=60°C
IFSM
Maximum instantaneous forward voltage at 3.0A
VF
Maximum peak reverse current
at rated peak reverse voltage
TA=25°C
TA=100°C
IR
Maximum reverse recovery time (NOTE1)
trr
Typical junction capacitance (NOTE 2)
CJ
Typical thermal resistance (NOTE 3)
RΘJA
Operating junction and storage temperature range
TJ ,TSTG
SUF30G
400
280
400
SUF30J
600
420
600
3.0
80.0
1.80
10.0
100.0
35.0
60
25.0
-55 to +150
2.0
NOTES:
(1) Reverse recovery test condition: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient at 0.200" (5.0mm) lead length with both leads attached to heat sink
UNITS
Volts
Volts
Volts
Amps
Amps
Volts
µA
ns
pF
°C/W
°C
www.shunyegroup.com.cn
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet SUF30G.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SUF3001 | Dual P-ch Trench MOSFET |  AUK |
| SUF301B | 3.0 Amp High Efficiency Recovery Rectifiers |  SeCoS |
| SUF301C | 3.0 Amp High Efficiency Recovery Rectifiers | SeCoS |
| SUF302B | 3.0 Amp High Efficiency Recovery Rectifiers | SeCoS |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |