DataSheetWiki


ST92F124R9 fiches techniques PDF

STMicroelectronics - 8/16-bit single voltage Flash MCU

Numéro de référence ST92F124R9
Description 8/16-bit single voltage Flash MCU
Fabricant STMicroelectronics 
Logo STMicroelectronics 





1 Page

No Preview Available !





ST92F124R9 fiche technique
ST92F124xx/ST92F150Cxx/
ST92F150JDV1/ST92F250CV2
8/16-bit single voltage Flash MCU family with RAM,
E³ TM (emulated EEPROM), CAN 2.0B and J1850 BLPD
Datasheet production data
Features
Memories
– Internal memory: Single Voltage Flash up to 256
Kbytes, RAM up to 8 Kbytes, 1 Kbyte E3 TM
(Emulated EEPROM)
– In-Application Programming (IAP)
– 224 general purpose registers (register file)
available as RAM, accumulators or index
pointers
Clock, reset and supply management
– Register-oriented 8/16 bit CORE with RUN,
WFI, SLOW, HALT and STOP modes
– 0-24 MHz Operation (Int. Clock), 4.5-5.5 V
range
– PLL Clock Generator (3-5 MHz crystal)
– Minimum instruction time: 83 ns (24 MHz int.
clock)
Up to 80 I/O pins
Interrupt management
– 4 external fast interrupts + 1 NMI
– Up to 16 pins programmable as wake-up or
additional external interrupt with multi-level
interrupt handler
DMA controller for reduced processor overhead
Timers
– 16-bit Timer with 8-bit Prescaler, and Watchdog
Timer (activated by software or by hardware)
– 16-bit Standard Timer that can be used to
generate a time base independent of PLL Clock
Generator
– Two 16-bit independent Extended Function
Timers (EFTs) with Prescaler, up to two Input
Captures and up to two Output Compares
– Two 16-bit Multifunction Timers, with Prescaler,
up to two Input Captures and up to two Output
Compares
Communication interfaces
– Serial Peripheral Interface (SPI) with selectable
Master/Slave mode
LQFP64
14x14
PQFP100
14x20
LQFP100
14x14
– One Multiprotocol Serial Communications
Interface with asynchronous and synchronous
capabilities
– One asynchronous Serial Communications
Interface with 13-bit LIN Synch Break
generation capability
– J1850 Byte Level Protocol Decoder (JBLPD)
– Up to two full I²C multiple Master/Slave
Interfaces supporting Access Bus
– Up to two CAN 2.0B Active interfaces
Analog peripheral (low current coupling)
– 10-bit A/D Converter with up to 16 robust input
channels
Development tools
– Free High performance development
environment (IDE) based on Visual Debugger,
Assembler, Linker, and C-Compiler; Real Time
Operating System (OSEK OS, CMX) and CAN
drivers
– Hardware emulator and Flash programming
board for development and ISP Flasher for
production
Table 1. Device summary
Reference
Part number
ST92F124xx
ST92F150Cxx
ST92F150JDxx
ST92F250Cxx
ST92F124R1, ST92F124R9,
ST92F124V1
ST92F150CR1, ST92F150CR9,
ST92F150CV1, ST92F150CV9
ST92F150JDV1
ST92F250CV2
July 2012
This is information on a product in full production.
Doc ID 8848 Rev 7
1/523
www.st.com
1

PagesPages 30
Télécharger [ ST92F124R9 ]


Fiche technique recommandé

No Description détaillée Fabricant
ST92F124R1 8/16-bit single voltage Flash MCU STMicroelectronics
STMicroelectronics
ST92F124R9 8/16-bit single voltage Flash MCU STMicroelectronics
STMicroelectronics

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche