|
|
PDF CPC1981 Data sheet ( Hoja de datos )
| Número de pieza | CPC1981 | |
| Descripción | Power Relay | |
| Fabricantes | Clare | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CPC1981 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
Parameter
Blocking Voltage
Load Current
On-Resistance
Rating
1000
0.18
18
Units
VP
Arms
Features
• Handle Load Currents Up to 0.25A
• 2500Vrms Input/Output Isolation
• Power SIP Package
• High Reliability
• No Moving Parts
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
Applications
• Industrial Controls
• Motor Control
• Robotics
• Medical Equipment—Patient/Equipment Isolation
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• IC Equipment
• Home Appliances
CPC1981
Single-Pole, Normally Open
OptoMOS® Power SIP Relay
Description
Clare and IXYS have combined to bring OptoMOS
technology, reliability, and compact size to a new
family of high power solid state relays. As part of
that family, the CPC1981 is a 1-Form-A solid state
relay. The CPC1981 employs optically coupled
MOSFET technology to provide 2500Vrms of input
to output isolation. The efficient MOSFET switches
and photovoltaic die use Clare’s patented OptoMOS
architecture while the output is controlled by a highly
efficient GaAlAs infrared LED. The combination of
low on-resistance and high load current handling
capabilities makes the relay suitable for a variety of
high performance switching applications.
Approvals
• UL 508 Recognized Component: File E69938
• CSA Certified Component: Certificate 1172007
Ordering Information
Part #
CPC1981Y
Description
Power SIP Package (25 per tube)
Pin Configuration
12
-+
3
4
Switching Characteristics of
Normally Open (Form A) Devices
Form-A
IF
ILOAD
90%
ton
10%
toff
Pb
RoHS
2002/95/EC
e3
DS-CPC1981-R04
www.clare.com
1
1 page  
CPC1981
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all
of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry
standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to
the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled
according to the limitations and information in that standard as well as to any limitations set forth in the information or
standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
CPC1981Y
Moisture Sensitivity Level (MSL) Rating
MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
CPC1981Y
Maximum Temperature x Time
245ºC for 30 seconds
Board Wash
Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable.
Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated products,
the use of a short drying bake may be necessary if a wash is used after solder reflow processes. Chlorine-based or
Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be
used.
Pb
RoHS
2002/95/EC
e3
R04 www.clare.com
5
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet CPC1981.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CPC1981 | Power SIP Relay |  IXYS |
| CPC1981 | Power Relay | Clare |
| CPC1981Y | Power SIP Relay | IXYS |
| CPC1983 | Power SIP Relay | IXYS |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |