|
|
Número de pieza | SMC48 | |
Descripción | GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS | |
Fabricantes | MIC | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SMC48 (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
No Preview Available ! GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS
SMC5.0 THRU SMC170CA
Stand-off Voltage
Peak Pulse Power
5.0 to 170 Volts
1500 Watts
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• For surface mounted applications in order to optimize
board space
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Low inductance
• 1500W peak pulse power capability with a 10/1000μs
waveform, repetition rate (duty cycle): 0.01%
• Excellent clamping capability
• Fast response time: typically less than 1.0ps from 0 Volts to
V(BR) for unidirectional and 5.0ns for bidirectional types
• For devices with V(BR)≥10V, ID are typically less 1.0μA
• High temperature soldering guaranteed:
250℃/10 seconds at terminals
MECHANICAL DATA
DO-214AB(SMC)
Dimensions in inches and (millimeters)
• Cass: JEDEC DO-214 AB, molded plastic over passivated junction
• Terminals: Solder plated, solderable per MIL-STD-750, Method 2026
• Polarity: For uni-direction types the Color band denotes the cathode, which is postitive with respect
to the anode under normal TVS operation
• Mounting Position: any
• Weight: 0.007 ounces, 0.21 gram
DEVICES FOR BIDRECTIONAL APPLICATIONS
• For bidirectional use suffix C or CA for types SMC-5.0 thru SMC-170 (e.g. SMC5.0C, SMC170CA).
Electrical characteristics apply in both in both directions.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25℃ ambient temperature unless otherwise specified
Ratings
Peak Pulse power dissipation with a 10/1000μs waveform(NOTE1.2,FIG.1)
Peak Pulse current with a 10/1000μs waveform (NOTE1,FIG.3)
Peak forward surge current 8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) (Notes 2,3) – unidirectional only
Maximum instantaneous forward voltage at 100A (NOTE3)
unidirectional only
Operating Junction and Storage Temperature Range
Symbols
PPPM
IPPM
IFSM
VF
TJ, TSTG
Value
Minimum1500
See Table 1
200.0
3.5
50 to + 150
Unit
Watts
Amps
Amps
Volts
℃
Notes:
1. Non-repetitive current pulse, per Fig.3 and derated above TA=25℃ per Fig.2
2. Mounted on 0.31×0.31” (8.0×8.0mm) copper pads to each terminal
3. Measured on 8.3ms single half sine-wave. For uni-directional devices only.
Web Site: www.hkmic.com
1 page |
Páginas | Total 4 Páginas | |
PDF Descargar | [ Datasheet SMC48.PDF ] |
Número de pieza | Descripción | Fabricantes |
SMC40 | GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS | MIC |
SMC400 | Rolling code decoder chip | Systron Microelectronics |
SMC400 | Rolling code decoder chip | Belling-Systron Microelectronics |
SMC401 | SMC401 | SHANGHAI BELLING |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |