DataSheetWiki


SMC130 fiches techniques PDF

MIC - GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS

Numéro de référence SMC130
Description GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS
Fabricant MIC 
Logo MIC 





1 Page

No Preview Available !





SMC130 fiche technique
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS
SMC5.0 THRU SMC170CA
Stand-off Voltage
Peak Pulse Power
5.0 to 170 Volts
1500 Watts
FEATURES
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
For surface mounted applications in order to optimize
board space
Low profile package
Built-in strain relief
Glass passivated junction
Low inductance
1500W peak pulse power capability with a 10/1000μs
waveform, repetition rate (duty cycle): 0.01%
Excellent clamping capability
Fast response time: typically less than 1.0ps from 0 Volts to
V(BR) for unidirectional and 5.0ns for bidirectional types
For devices with V(BR)10V, ID are typically less 1.0μA
High temperature soldering guaranteed:
250/10 seconds at terminals
MECHANICAL DATA
DO-214AB(SMC)
Dimensions in inches and (millimeters)
Cass: JEDEC DO-214 AB, molded plastic over passivated junction
Terminals: Solder plated, solderable per MIL-STD-750, Method 2026
Polarity: For uni-direction types the Color band denotes the cathode, which is postitive with respect
to the anode under normal TVS operation
Mounting Position: any
Weight: 0.007 ounces, 0.21 gram
DEVICES FOR BIDRECTIONAL APPLICATIONS
For bidirectional use suffix C or CA for types SMC-5.0 thru SMC-170 (e.g. SMC5.0C, SMC170CA).
Electrical characteristics apply in both in both directions.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25ambient temperature unless otherwise specified
Ratings
Peak Pulse power dissipation with a 10/1000μs waveform(NOTE1.2,FIG.1)
Peak Pulse current with a 10/1000μs waveform (NOTE1,FIG.3)
Peak forward surge current 8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) (Notes 2,3) unidirectional only
Maximum instantaneous forward voltage at 100A (NOTE3)
unidirectional only
Operating Junction and Storage Temperature Range
Symbols
PPPM
IPPM
IFSM
VF
TJ, TSTG
Value
Minimum1500
See Table 1
200.0
3.5
50 to + 150
Unit
Watts
Amps
Amps
Volts
Notes:
1. Non-repetitive current pulse, per Fig.3 and derated above TA=25per Fig.2
2. Mounted on 0.31×0.31(8.0×8.0mm) copper pads to each terminal
3. Measured on 8.3ms single half sine-wave. For uni-directional devices only.
Web Site: www.hkmic.com

PagesPages 4
Télécharger [ SMC130 ]


Fiche technique recommandé

No Description détaillée Fabricant
SMC13 (SMC Series) SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS Lite-On
Lite-On
SMC13 GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS MIC
MIC
SMC130 (SMC Series) SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS Lite-On
Lite-On
SMC130 GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS MIC
MIC

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche