DataSheet.es    


PDF AM800480E3TMQW-00H Data sheet ( Hoja de datos )

Número de pieza AM800480E3TMQW-00H
Descripción LCD Module
Fabricantes AMPIRE 
Logotipo AMPIRE Logotipo



Hay una vista previa y un enlace de descarga de AM800480E3TMQW-00H (archivo pdf) en la parte inferior de esta página.


Total 14 Páginas

No Preview Available ! AM800480E3TMQW-00H Hoja de datos, Descripción, Manual

Preliminary
The contents of this document are confidential and must not be disclosed wholly or in part to any third
part without the prior written consent of AMPIRE CO., LTD
A MP I R E
SPECIFICATIONS FOR
LCD MODULE
CUSTOMER
Preliminary Reference Only
CUSTOMER PART NO.
AMPIRE PART NO. AM800480E3TMQW-00H
APPROVED BY
DATE
2007/10/02
; Approved For Specifications
† Approved For Specifications & Sample
APPROVED BY
CHECKED BY
ORGANIZED BY
Date : 2007/10/02
AMPIRE CO., LTD.
1

1 page




AM800480E3TMQW-00H pdf
Preliminary
The contents of this document are confidential and must not be disclosed wholly or in part to any third
part without the prior written consent of AMPIRE CO., LTD
4. ELECTRICAL CHARACTERISTICS
4-1 TFT LCD Module voltage
ITEM
SYMBOL MIN TYP MAX UNIT
Power Supply Voltage For LCD
Vcc 3.0 3.3 4.0 V
Power Supply Voltage For LED
VLED 9.3 9.6 9.9
V
Logic Input Voltage
VIN 0 -
Input Threshold Voltage(High) VTH 3.0 -
Voltage Threshold Voltage(Low)
VTL GND -
Vcc V
Vcc V
0.5 V
Date : 2007/10/02
AMPIRE CO., LTD.
5

5 Page





AM800480E3TMQW-00H arduino
Preliminary
The contents of this document are confidential and must not be disclosed wholly or in part to any third
part without the prior written consent of AMPIRE CO., LTD
9. USE PRECAUTIONS
9-1 Handling precautions
(1) The polarizing plate may break easily so be careful when handling it. Do not
touch, press or rub it with a hard-material tool like tweezers.
(2) Do not touch the polarizing plate surface with bare hands so as not to make it
dirty. If the surface or other related part of the polarizing plate is dirty, soak a soft
cotton cloth or chamois leather in benzine and wipe off with it. Do not use chemical
liquids such as acetone, toluene and isopropyl alcohol. Failure to do so may bring
chemical reaction phenomena and deteriorations.
(3) Remove any spit or water immediately. If it is left for hours, the suffered part may
deform or decolorize.
(1) If the LCD element breaks and any LC stuff leaks, do not suck or lick it. Also if
LC stuff is stuck on your skin or clothing, wash thoroughly with soap and water
immediately.
9-2 Installing precautions
(1) The PCB has many ICs that may be damaged easily by static electricity. To
prevent breaking by static electricity from the human body and clothing, earth the
human body properly using the high resistance and discharge static electricity
during the operation. In this case, however, the resistance value should be approx.
1Mand the resistance should be placed near the human body rather than the
ground surface. When the indoor space is dry, static electricity may occur easily so
be careful. We recommend the indoor space should be kept with humidity of 60% or
more. When a soldering iron or other similar tool is used for assembly, be sure to
earth it.
(2) When installing the module and ICs, do not bend or twist them. Failure to do so
may crack LC element and cause circuit failure.
(3) To protect LC element, especially polarizing plate, use a transparent protective
plate (e.g., acrylic plate, glass etc) for the product case.
(4) Do not use an adhesive like a both-side adhesive tape to make LCD surface
(polarizing plate) and product case stick together. Failure to do so may cause the
polarizing plate to peel off
9-3 Storage precautions
(1) Avoid a high temperature and humidity area. Keep the temperature between 0°C
and 35°C and also the humidity under 60%.
(2) Choose the dark spaces where the product is not exposed to direct sunlight or
fluorescent light.
(3) Store the products as they are put in the boxes provided from us or in the same
conditions as we recommend.
Date : 2007/10/02
AMPIRE CO., LTD.
11

11 Page







PáginasTotal 14 Páginas
PDF Descargar[ Datasheet AM800480E3TMQW-00H.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
AM800480E3TMQW-00HLCD ModuleAMPIRE
AMPIRE

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar