|
|
PDF TLE4998S3C Data sheet ( Hoja de datos )
| Número de pieza | TLE4998S3C | |
| Descripción | Programmable Linear Hall Sensor | |
| Fabricantes | Infineon | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de TLE4998S3C (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
Data Sheet, Rev 1.1, September 2009
TLE4998S3C
Programmable Linear Hall Sensor
Sensors
Never stop thinking.
1 page  
Programmable Linear Hall Sensor
TLE4998S3C
1 Overview
1.1 Features
• Single Edge Nibble Transmission (SENT) open-drain
output signal (SAE J2716)
• 20-bit Digital Signal Processing (DSP)
• Digital temperature compensation
• 16-bit overall resolution
• Operates within automotive temperature range
• Low drift of output signal over temperature and lifetime
• Programmable parameters stored in EEPROM with
single-bit error correction:
– SENT unit time
PG-SSO-3-9x
– Magnetic range and sensitivity (gain), polarity of the
output slope
– Offset
– Bandwidth
– Clamping levels
– Customer temperature compensation coefficients
– Memory lock
• Re-programmable until memory lock
• Supply voltage 4.5 - 5.5 V (4.1 - 16 V extended range)
• Operation between -200 mT and +200 mT within three
ranges
• Reverse-polarity and overvoltage protection for all pins
• Output short-circuit protection
• On-board diagnostics (overvoltage, EEPROM error, start up)
• Output of internal magnetic field values and temperature
• Programming and operation of multiple sensors with common power supply
• Two-point calibration of magnetic transfer function without iteration steps
• High immunity against mechanical stress, EMC, ESD
• Package with two capacitors: 47nF (VDD to GND) and 4.7nF (OUT to GND)
Type
TLE4998S3C
Data Sheet
Marking
98S3C
Ordering Code
SP000481484
Package
PG-SSO-3-92
5 Rev 1.1, 2009-09
5 Page 
TLE4998S3C
Operating Range
4 Operating Range
The following operating conditions must not be exceeded in order to ensure correct
operation of the TLE4998S3C. All parameters specified in the following sections refer to
these operating conditions, unless otherwise indicated.
Table 3
Operating Range
Parameter
Symbol Limit Values
min. max.
Supply voltage
VDD
Output pull-up voltage3)
Load resistance3)
Output current3)
Junction temperature
Vpull-up
RL
IOUT
TJ
4.5
4.11)
-
1
0
- 40
5.5
162)
18
-
5
125
1504)
Unit
V
V
V
kΩ
mA
°C
Notes
Extended range
For 5000 h
For 1000 h not additive
1) For reduced output accuracy
2) For supply voltages > 12 V, a series resistance Rseries ≥ 100 Ω is recommended
3) Output protocol characteristics depend on these parameters, RL must be according to max. output current
4) For reduced magnetic accuracy; extended limits are taken for characteristics
Keeping signal levels within the limits specified in this table ensures operation without
overload conditions.
Data Sheet
11 Rev 1.1, 2009-09
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet TLE4998S3C.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TLE4998S3 | Programmable Linear Hall Sensor | Infineon |
| TLE4998S3C | Programmable Linear Hall Sensor | Infineon |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |