|
|
Número de pieza | LS013B4DN02 | |
Descripción | TFT-LCD Module | |
Fabricantes | Sharp | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de LS013B4DN02 (archivo pdf) en la parte inferior de esta página. Total 29 Páginas | ||
No Preview Available ! No. LCY-12T09303B
Date July. 21st 2009
TECHNICAL LITERATURE
For
TFT-LCD Module
Model No. LS013B4DN02
Notice
The technical Literature is subject to change without any prior
notice for the purpose of product improvement.
Please contact Sharp or its representative before designing your
product based on this literature.
Mobile Liquid Crystal Display Group
SHARP CORPORATION
1 page SPEC No.
MODEL No.
LCY-12T09303B
LS013B4DN02
PAGE
4
[For operating LCD module]
(1) Do not operate the LCD panel under outside of electrical specification. Otherwise LCD panel may be damaged.
(2) Do not use the LCD panel under outside of specified driving timing chart. Otherwise LCD panel may not have
proper picture quality.
(3) A still image should be displayed less than two hours, if it is necessary to display still image longer than two hour,
display image data must be refreshed in order to avoid sticking image on LCD panel.
[Precautions for Storage]
(1) After opening the package, do not leave the LCD panel in direct sun or under strong ultraviolet ray. Store in dark
place.
(2) In temperature lower than specified rating, liquid crystal material will coagulate. In temperature higher than
specified rating, it isotropically liquifies. In either condition, the liquid crystal may not recover its original condition.
Store the LCD panel in at or around room temperature as much as possible.
Also, storing the LCD panel in high humidity will damage the polarizer. Store in normal room temperature as much
as possible.
(3) Keeping Method
a. Don't keeping under the direct sunlight.
b. Keeping in the tray under the dark place.
5 Page SPEC No.
MODEL No.
LCY-12T09303B
LS013B4DN02
PAGE
10
6. Electrical characteristics
6-1) TFT LCD panel drive
Table6-1 Recommended operating Condition
VSS(GND) 0V Ta 25℃
Item
symbol
MIN.
TYP.
MAX.
Unit
Remark
Power supply
Analog
VDDA
4.8
5.0 5.5 V
Logic
VDD
4.8 5.0 5.5 V [Remark6-1]
Input signal voltage Hi
VIH 2.70 3.00 VDD V [Remark6-2]
Lo
VIL
VSS
VSS
VSS+0.15 V
Input leak current Hi
IOH -
-
TBD
uA [Remark6-2]
VI=3V
Lo
IOL -
-
TBD
uA [Remark6-2]
VI=0V
Can operate below VDD voltage, however, operation around 3V is recommended.
[Remark6-1] Applies to EXTMODE ”H”
[Remark6-2] Applies to SCLK, SI, SCS, DISP, EXTCOMIN.
11 Page |
Páginas | Total 29 Páginas | |
PDF Descargar | [ Datasheet LS013B4DN02.PDF ] |
Número de pieza | Descripción | Fabricantes |
LS013B4DN01 | LCD Module | Sharp |
LS013B4DN02 | TFT-LCD Module | Sharp |
LS013B4DN04 | LCD Module | Sharp |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |